ICS601-01
LOW PHASE NOISE CLOCK MULTIPLIER CLOCK MULTIPLIER
IDT™ / ICS™
LOW PHASE NOISE CLOCK MULTIPLIER 4
ICS601-01 REV N 051310
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the ICS601-01. These ratings, which are
standard values for IDT commercially rated parts, are stress ratings only. Functional operation of the device at these
or any other conditions above those indicated in the operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical
parameters are guaranteed only over the recommended operating temperature range.
Recommended Operation Conditions
DC Electrical Characteristics
VDD=3.3 V ±10%, Ambient temperature -40 to +85° C
Note 1: Switching occurs nominally at VDD/2
Item Rating
Supply Voltage, VDD 7 V
All Inputs and Outputs -0.5 V to VDD+0.5 V
Ambient Operating Temperature, Commercial version 0 to +70 ° C
Ambient Operating Temperature, Industrial version -40 to +85 ° C
Storage Temperature -65 to +150 ° C
Junction Temperature 125 ° C
Soldering Temperature 260 ° C
Parameter Min. Typ. Max. Units
Ambient Operating Temperature -40 +85 ° C
Power Supply Voltage (measured in respect to GND) +3.0 +5.5 V
Parameter Symbol Conditions Min. Typ. Max. Units
Operating Voltage VDD 3.0 5.5 V
Input High Voltage V
IH
X1/ICLK pin only
Note 1
VDD/2+1 V
Input Low Voltage V
IL
X1/ICLK pin only
Note 1
VDD/2-1 V
Input High Voltage V
IH
2V
Input Low Voltage V
IL
0.8 V
Output High Voltage V
OH
CMOS level
I
OH
= -4mA
VDD-0.4 V
I
OH
= -12mA 2.4
Output Low Voltage V
OL
I
OL
= 12mA 0.4 V
Operating Supply Current IDD No load, 125 MHz 22 30 mA
Short Circuit Current Each output ±40 ±60 mA
Input Capacitance C
IN
OE, select pins 5 pF
