9397 750 13543 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 01 — 11 November 2005 4 of 13
Philips Semiconductors
GTL2034
4-bit GTL to GTL buffer
8. Limiting values
[1] Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under Section 9 “Recommended operating conditions” is not implied.
Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
[2] The input and output negative voltage ratings may be exceeded if the input and output clamp current ratings are observed.
[3] Current into any output in the LOW state.
[4] The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction
temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150 °C.
9. Recommended operating conditions
[1] V
TT
maximum of 3.6 V with resistor sized so I
OL
maximum is not exceeded.
Table 6: Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
[1]
Voltages are referenced to GND (ground=0V).
Symbol Parameter Conditions Min Max Unit
V
CC
supply voltage −0.5 +4.6 V
I
IK
input clamping current V
I
<0V - −50 mA
V
I
input voltage B port −0.5
[2]
+4.6 V
I
OK
output clamping current V
O
<0V - −50 mA
V
O
output voltage output in OFF or
HIGH state; B port
−0.5
[2]
+4.6 V
I
OL
LOW-state output current
[3]
B port - 80 mA
T
stg
storage temperature
[4]
−60 +150 °C
Table 7: Recommended operating conditions
Unused inputs must be held HIGH or LOW to prevent them from floating.
Symbol Parameter Conditions Min Typ Max Unit
V
CC
supply voltage 3.0 - 3.6 V
V
TT
termination voltage
[1]
GTL− 0.85 0.9 0.95 V
GTL 1.14 1.2 1.26 V
GTL+ 1.35 1.5 1.65 V
V
ref
reference voltage overall 0.5
2
⁄
3
V
TT
V
CC
/2 V
GTL− 0.5 0.6 0.63 V
GTL 0.76 0.8 0.84 V
GTL+ 0.87 1.0 1.10 V
V
I
input voltage B port 0 V
TT
3.6 V
V
IH
HIGH-state input voltage B port V
ref
+ 0.050 - - V
V
IL
LOW-state input voltage B port - - V
ref
− 0.050 V
I
OL
LOW-state output current B port - - 40 mA
T
amb
ambient temperature operating in free air −40 - +85 °C