1Description
Axioline E PROFINET device, plastic housing,
8inputs, 4outputs, 24VDC,
M12 fast connection technology
AXL E PN DI8 DO4 2A M12 6P
© PHOENIX CONTACT
Data sheet
The Axioline E device is designed for use within a
PROFINET network.
It is used to acquire and output digital signals.
PROFINET features
Connection to PROFINET network
using M12 connectors (D-coded)
2 Ethernet ports (with integrated switch)
Transmission speed 100 Mbps
PROFINET RT (RTC 1) supported
with minimum cycle time of 1 ms
Supported protocols: SNMP, LLDP, MRP, DCP
–PROFINET features:
FSU, shared device, MRP client, I&M functions 0 - 4
Specification:
Mapping in accordance with PROFINET
specification v2.2
Mapping as PROFINET IO device
(conformance class B)
Device description using GSDML file
–Firmware can be updated
Integrated web server for web-based management
AxiolineE features
Connection of digital sensors
to M12 connectors (A-coded)
Diagnostic and status indicators
Short-circuit and overload protection
of the sensor supply
IP65/67 degree of protection
This data sheet is only valid in association with the associated user manual.
Make sure you always use the latest documentation.
It can be downloaded from the product at phoenixcontact.net/products.
Abbreviations used:
– FSU: Fast startup
– MRP: Media Redundancy Protocol
– I&M: Identification and maintenance
8449_en_04
2015-10-15
AXL E PN DI8 DO4 2A M12 6P
8449_en_04 PHOENIX CONTACT 2
2Table of contents
1 Description .............................................................................................................................. 1
2 Table of contents ..................................................................................................................... 2
3 Ordering data .......................................................................................................................... 3
4 Technical data ......................................................................................................................... 4
5 Internal circuit diagram ............................................................................................................ 7
6 Pin assignment ........................................................................................................................ 8
6.1 PROFINET and power supply connection .................................................................................. 8
6.2 PROFINET pin assignment .................................................................................................... 8
6.3 Pin assignment of the power supply U
S
/U
A
................................................................................. 8
6.4 Connecting inputs and outputs................................................................................................ 9
6.5 Pin assignment of the inputs and outputs................................................................................... 9
7 Connection example.............................................................................................................. 10
8 Connection notes .................................................................................................................. 10
9 Local status and diagnostic indicators ................................................................................... 11
9.1 Indicators for Ethernet ports and power supply.......................................................................... 11
9.2 Input and output indicators ................................................................................................... 12
10 PROFINET IO Device ............................................................................................................13
10.1 Status module................................................................................................................... 13
10.2 IO module........................................................................................................................ 13
10.3 Substitute value behavior..................................................................................................... 14
10.4 Diagnostic messages ......................................................................................................... 15
10.5 LLDP - Link Layer Discovery Protocol ..................................................................................... 15
10.6 MRP - Media Redundancy Protocol........................................................................................ 15
11 FSU - Fast Startup................................................................................................................. 15
11.1 Shared device................................................................................................................... 15
11.2 Device replacement ........................................................................................................... 15
11.3 I&M functions.................................................................................................................... 16
12 Startup................................................................................................................................... 17
12.1 Delivery state/default settings ............................................................................................... 17
12.2 Starting the firmware .......................................................................................................... 17
12.3 Firmware update ............................................................................................................... 17
12.4 Restoring the default settings................................................................................................ 17
13 WBM - Web-based management .......................................................................................... 18
14 SNMP - Simple Network Management Protocol .................................................................... 18
15 Device description file (GSDML) ........................................................................................... 18
AXL E PN DI8 DO4 2A M12 6P
8449_en_04 PHOENIX CONTACT 3
Description Type Order No. Pcs./Pkt.
AxiolineE-PROFINET device in a plastic housing with 8digital inputs and
4digital outputs, each with a load capacity of 2A, 24VDC, M12 fast con-
nection technology
AXL E PN DI8 DO4 2A M12 6P 2701512 1
Accessories Type Order No. Pcs./Pkt.
An M12 screw plug for the unoccupied M12 sockets of the sensor/actuator
cable, boxes and flush-type connectors (Protection and sealing elements)
PROT-M12 1680539 5
Snap-in markers, Sheet, white, unlabeled, can be labeled with:
THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED,
TOPMARK LASER, Mounting type: snapped into marker carrier,
Lettering field: 7 x 10 mm (Marking)
UCT-EM (7X10) 0830765 10
Documentation Type Order No. Pcs./Pkt.
User manual, English, Axioline E: system and installation UM EN AXL E SYS INST - -
Application note, English, Starting up Axioline E PROFINET devices
using PC Worx
AH EN AXL E PN PCWORX - -
Application note, English, Startup of Axioline E PROFINET devices
on a SIMATIC
®
S7 controller (for experienced S7 users)
AH EN S7 - AXL E PN PRO - -
Additional ordering data
For additional accessories, visit phoenixcontact.net/products.
3Ordering data

2701512

Mfr. #:
Manufacturer:
Phoenix Contact
Description:
Terminal Block Interface Modules AXL E PN DI8 DO42AM126P
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet