© Semiconductor Components Industries, LLC, 2005
November, 2005 Rev. 4
1 Publication Order Number:
NB2305A/D
NB2305A
3.3 V Zero Delay
Clock Buffer
The NB2305A is a versatile, 3.3 V zero delay buffer designed to
distribute highspeed clocks. It accepts one reference input and drives
out five lowskew clocks. It is available in a 8 pin package.
The 1H version of the NB2305A operates at up to 133 MHz, and
has higher drive than the 1 devices. All parts have onchip PLLs that
lock to an input clock on the REF pin. The PLL feedback is onchip
and is obtained from the CLKOUT pad.
Multiple NB2305A devices can accept the same input clock and
distribute it. In this case the skew between the outputs of the two
devices is guaranteed to be less than 700 ps.
All outputs have less than 200 ps of cycletocycle jitter. The input
and output propagation delay is guaranteed to be less than 350 ps, and
the output to output skew is guaranteed to be less than 250 ps.
The NB2305A is available in two different configurations, as shown
in the ordering information table. The NB2305A1 is the base part. The
NB2305Ax1H* is the high drive version of the 1 and its rise and fall
times are much faster than 1 part.
Features
15 MHz to 133 MHz Operating Range, Compatible with CPU and
PCI Bus Frequencies
Zero Input Output Propagation Delay
Multiple LowSkew Outputs
OutputOutput Skew Less than 250 ps
DeviceDevice Skew Less than 700 ps
One Input Drives 5 Outputs
Less than 200 ps CycletoCycle Jitter is Compatible with PentiumR
Based Systems
Available in 8 Pin, 150 mil SOIC Package and 8 Pin TSSOP 4.4 mm
3.3 V Operation, Advanced 0.35 CMOS Technology
PbFree Packages are Available
*x = C for Commercial; I for Industrial.
MARKING
DIAGRAMS*
XXXX = Device Code
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
G = PbFree Package
(Note: Microdot may be in either location)
*For additional marking information, refer to
Application Note AND8002/D.
1
8
SOIC8
D SUFFIX
CASE 751
See detailed ordering and shipping information in the package
dimensions section on page 7 of this data sheet.
ORDERING INFORMATION
http://onsemi.com
1
8
TSSOP8
DT SUFFIX
CASE 948J
XXXX
ALYW
G
1
8
XXX
ALYWG
G
1
8
NB2305A
http://onsemi.com
2
Figure 1. Block Diagram
REF
PLL
CLKOUT
CLK1
CLK2
CLK3
CLK4
Figure 2. Pin Configuration
V
DD
1
2
3
4
8
7
6
5
REF
CLK2
CLK1
GND
CLKOUT
CLK4
CLK3
NB2305A
Table 1. PIN DESCRIPTION
Pin # Pin Name Description
1 REF (Note1) Input reference frequency, 5 V tolerant input.
2 CLK2 (Note 2) Buffered clock output.
3 CLK1 (Note 2) Buffered clock output.
4 GND Ground.
5 CLK3 (Note 2) Buffered clock output.
6 V
DD
3.3 V supply.
7 CLK4 (Note 2) Buffered clock output.
8 CLKOUT (Note 2) Buffered clock output, internal feedback on this pin.
1. Weak pulldown.
2. Weak pulldown on all outputs.
NB2305A
http://onsemi.com
3
Table 2. MAXIMUM RATINGS
Parameter Min Max Unit
Supply Voltage to Ground Potential 0.5 +7.0 V
DC Input Voltage (Except REF) 0.5 V
DD
+ 0.5 V
DC Input Voltage (REF) 0.5 7 V
Storage Temperature 65 +150 °C
Maximum Soldering Temperature (10 sec) 260 °C
Junction Temperature 150 °C
Static Discharge Voltage (per MILSTD883, Method 3015) >2000 V
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit
values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied,
damage may occur and reliability may be affected.
Table 3. OPERATING CONDITIONS FOR COMMERCIAL AND INDUSTRIAL TEMPERATURE DEVICES
Parameter Description Min Max Unit
V
DD
Supply Voltage 3.0 3.6 V
T
A
Operating Temperature (Ambient Temperature) Commercial
Industrial
0
40
70
85
°C
C
L
Load Capacitance, below 100 MHz 30 pF
C
L
Load Capacitance, from 100 MHz to 133 MHz 10 pF
C
IN
Input Capacitance 7 pF
Table 4. ELECTRICAL CHARACTERISTICS FOR COMMERCIAL AND INDUSTRIAL TEMPERATURE DEVICES
Parameter Description Test Conditions Min Max Unit
V
IL
Input LOW Voltage (Note 3) 0.8 V
V
IH
Input HIGH Voltage (Note 3) 2.0 V
I
IL
Input LOW Current V
IN
= 0 V 50
A
I
IH
Input HIGH Current V
IN
= V
DD
100
A
V
OL
Output LOW Voltage I
OL
= 8 mA (1)
I
OL
= 12 mA (1H)
0.4 V
V
OH
Output HIGH Voltage I
OH
= 8 mA (1)
I
OH
= 12 mA (1H)
2.4 V
I
DD
Supply Current (Commercial Temp) Unloaded outputs at 66.67 MHz,
Select inputs at V
DD
34 mA
I
DD
Supply Current (Industrial Temp) Unloaded outputs at 100 MHz
66.67 MHz
33 MHz
Select inputs at V
DD
or GND, at Room
Temp
50
34
19
mA
3. REF input has a threshold voltage of V
DD
/2.

NB2305AC1DG

Mfr. #:
Manufacturer:
ON Semiconductor
Description:
Phase Locked Loops - PLL 3.3V Five Output Zero Delay Buffer
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union