REV. A
a
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
Single Supply, Low Power,
Triple Video Amplifier
FEATURES
Three Video Amplifiers in One Package
Drives Large Capacitive Load
Excellent Video Specifications (R
L
= 150 V)
Gain Flatness 0.1 dB to 60 MHz
0.02% Differential Gain Error
0.06° Differential Phase Error
Low Power
Operates on Single +5 V to +13 V Power Supplies
4 mA/Amplifier Max Power Supply Current
High Speed
140 MHz Unity Gain Bandwidth (3 dB)
Fast Settling Time of 18 ns (0.1%)
1000 V/ms Slew Rate
High Speed Disable Function per Channel
Turn-Off Time 30 ns
Easy to Use
95 mA Short Circuit Current
Output Swing to Within 1 V of Rails
APPLICATIONS
LCD Displays
Video Line Driver
Broadcast and Professional Video
Computer Video Plug-In Boards
Consumer Video
RGB Amplifier in Component Systems
AD8013
PIN CONFIGURATION
14-Pin DIP & SOIC Package
1
2
3
4
5
6
7
14
13
12
11
10
9
8
AD8013
OUT 2
–IN 2
+IN 2
–V
S
+IN 3
–IN 3
OUT 3
DISABLE 1
DISABLE 2
DISABLE 3
+V
S
+IN 1
–IN 1
OUT 1
PRODUCT DESCRIPTION
The AD8013 is a low power, single supply, triple video
amplifier. Each of the three amplifiers has 30 mA of output
current, and is optimized for driving one back terminated video
load (150 Ω) each. Each amplifier is a current feedback amp-
lifier and features gain flatness of 0.1 dB to 60 MHz while offering
FREQUENCY – Hz
–0.5
1M
1G
10M
NORMALIZED GAIN – dB
100M
0.2
0.1
0
–0.1
–0.2
–0.3
–0.4
G = +2
R
L
= 150Ω
V
S
= ± 5V
V
S
= +5V
Fine-Scale Gain Flatness vs. Frequency, G = +2, R
L
= 150
Ω
© Analog Devices, Inc., 1995
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 617/329-4700 Fax: 617/326-8703
differential gain and phase error of 0.02% and 0.06°. This
makes the AD8013 ideal for broadcast and professional video
electronics.
The AD8013 offers low power of 4 mA per amplifier max and
runs on a single +5 V to +13 V power supply. The outputs of
each amplifier swing to within one volt of either supply rail to
easily accommodate video signals. The AD8013 is unique
among current feedback op amps by virtue of its large capacitive
load drive. Each op amp is capable of driving large capacitive
loads while still achieving rapid settling time. For instance it
can settle in 18 ns driving a resistive load, and achieves 40 ns
(0.1%) settling while driving 200 pF.
The outstanding bandwidth of 140 MHz along with 1000 V/µs
of slew rate make the AD8013 useful in many general purpose
high speed applications where a single +5 V or dual power
supplies up to ±6.5 V are required. Furthermore the AD8013’s
high speed disable function can be used to power down the
amplifier or to put the output in a high impedance state. This
can then be used in video multiplexing applications. The
AD8013 is available in the industrial temperature range of
–40°C to +85°C.
1
0
0%
100
9
0
500ns
500mV
5V
Channel Switching Characteristics for a 3:1 Mux
