2SC0650P2A0-17 Datasheet 2SC0650P2A0-17 | P1-P3

2SC0650P2Ax-17

IGBT-Driver.com Page 1

2SC0650P2Ax-17 Preliminary Data Sheet

Dual-Channel High-Power High-Frequency SCALE-2 Driver Core

Short Description

The SCALE-2 dual driver core 2SC0650P2Ax-17 combines highest power density with broad applicability. The

driver is designed for both high-power and high-frequency applications requiring maximum reliability. It is

suitable for IGBTs with reverse voltages up to 1700V and also features a dedicated MOSFET mode. The

embedded paralleling capability allows easy inverter design covering higher power ratings. Multi-level

topologies are also supported.

CONCEPT’s patented planar-transformer technology assures efficient and high-voltage isolation with long-term

reliability and sets new milestones in compactness, interference immunity and performance. Its outstanding

EMC with a dv/dt strength of more than 100V/ns allows safe and reliable operation in even the toughest

industrial applications.

Thanks to its ultra-flat design with an insertion height of max. 6.5mm and a footprint of 61.7mm x 57.2, the

2SC0650P2Ax-17 can efficiently utilize even the most constrained insertion spaces. Compared with

conventional drivers, the highly integrated SCALE-2 chipset allows about 85% of components to be dispensed

with. This advantage is impressively reflected in increased reliability at simultaneously minimized cost.

Equipped with the latest SCALE-2 technology, the driver core opens up the possibility of working with clock

frequencies of up to 150kHz – at best-in-class efficiency. The 2SC0650P2Ax-17 combines a complete two-

channel driver core with all components required for driving, such as an isolated DC/DC converter, short-circuit

protection, advanced active clamping as well as supply voltage monitoring. Each of the two output channels is

electrically isolated from the primary side and the other secondary channel.

Product Highlights Applications



Wind power converters



Industrial drives



Traction applications



Electro/hybrid drive commercial vehicles



Driving parallel-connected large IGBTs



High gate-current driving applications



Induction heating



Switched mode power supplies (SMPS)



Laser and medical (MRT, CT, X-Ray)



Laser technology



Ultra-flat dual channel driver



Highly integrated SCALE-2 chipset



Planar transformer technology



Blocking voltages up to 1700V



Switching frequency up to 150kHz



Short delay and extremely small jitter



Gate current ±50A, 6W output power per channel



+15V/-10V gate driving



Safe isolation to EN 50178



UL compliant

2SC0650P2Ax-17

Preliminary Data Sheet

Page 2 INTELLIGENT POWER ELECTRONICS

Safety Notice!

The data contained in this data sheet is intended exclusively for technically trained staff. Handling all high-

voltage equipment involves risk to life. Strict compliance with the respective safety regulations is mandatory!

Any handling of electronic devices is subject to the general specifications for protecting electrostatic-sensitive

devices according to international standard IEC 60747-1, Chapter IX or European standard EN 100015 (i.e. the

workplace, tools, etc. must comply with these standards). Otherwise, this product may be damaged.

Important Product Documentation

This data sheet contains only product-specific data. For a detailed description, must-read application notes and

important information that apply to this product, please refer to “2SC0650P Description & Application Manual”

on www.IGBT-Driver.com/go/2SC0650P

Absolute Maximum Ratings

Parameter Remarks Min Max Unit

Supply voltage V

VDC to GND 0 16 V

Supply voltage V

VCC to GND 0 16 V

Logic input and output voltages Primary side, to GND -0.5 VCC+0.5 V

SOx current Failure condition, total current 20 mA

Gate peak current I

out

Note 1 -50 +50 A

External gate resistance Turn-on and turn-off 0.5 Ω

Average supply current I

Notes 2, 3 1300 mA

Output power Ambient temperature <70°C (Notes 4, 5) 6.5 W

Ambient temperature 85°C (Note 4) 6 W

Switching frequency F 150 kHz

Test voltage (50Hz/1min.) Primary to secondary (Note 15) 5000 V

AC(eff)

Secondary to secondary (Note 15) 4000 V

AC(eff)

|dV/dt| Rate of change of input to output voltage (Note 11) 100 kV/μs

Operating voltage Primary/secondary, secondary/secondary 1700 V

peak

Operating temperature Note 5 -40 +85 °C

Storage temperature -40 +90 °C

Recommended Operating Conditions

Power Supply Remarks Min Typ Max Unit

Supply voltage

VDC to GND 14.5 15 15.5 V

Supply voltage

VCC to GND 14.5 15 15.5 V

2SC0650P2Ax-17

Preliminary Data Sheet

IGBT-Driver.com Page 3

Electrical Characteristics (IGBT mode)

All data refer to +25°C and V

= V

= 15V unless otherwise specified.

Power supply Remarks Min Typ Max Unit

Supply current I

Without load 40 mA

Supply current I

F = 0Hz 21 mA

Supply current I

F = 150kHz 35 mA

Coupling capacitance C

Primary to output, total 28 pF

Power Supply Monitoring Remarks Min Typ Max Unit

Supply threshold V

Primary side, clear fault 11.9 12.6 13.3 V

Primary side, set fault (Note 12) 11.3 12.0 12.7 V

Monitoring hysteresis Primary side, set/clear fault 0.35 V

Supply threshold V

ISOx

-V

Secondary side, clear fault 12.1 12.6 13.1 V

Secondary side, set fault (Note 13) 11.5 12.0 12.5 V

Monitoring hysteresis Secondary side, set/clear fault 0.35 V

Supply threshold V

-V

COMx

Secondary side, clear fault 5 5.15 5.3 V

Secondary side, set fault (Note 13) 4.7 4.85 5 V

Monitoring hysteresis Secondary side, set/clear fault 0.15 V

Logic Inputs and Outputs Remarks Min Typ Max Unit

Input bias current V(INx) > 3V 190 µA

Turn-on threshold V(INx) 2.6 V

Turn-off threshold V(INx) 1.3 V

SOx output voltage Failure condition, I(SOx)<20mA 0.7 V

Short-Circuit Protection Remarks Min Typ Max Unit

Current through pin REFx R(REFx, VEx)<70kΩ 150 µA

Minimum response time Note 9 1.2 µs

Minimum blocking time Note 10 9 µs

Timing Characteristics Remarks Min Typ Max Unit

Turn-on delay t

d(on)

Note 6 80 ns

Turn-off delay t

d(off)

Note 6 75 ns

Jitter of turn-on delay Note 17 ±2 ns

Jitter of turn-off delay Note 17 ±2 ns

Output rise time t

r(out)

Note 7 25 ns

Output fall time t

f(out)

Note 7 25 ns

Transmission delay of fault state Note 14 400 ns

P1-P3 P4-P6

2SC0650P2A0-17

Mfr. #:

Buy 2SC0650P2A0-17

Manufacturer:

Power Integrations

Description:

Power Management Modules Dual-Ch 50A Module IGBT Driver

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

2SC0650P2A0-17