SCALE™-2 2SC0535T2A1-33
Preliminary Data Sheet
www.power.com/igbt-driver Page 3
Recommended Operating Conditions
Power Supply Remarks Min Typ Max Unit
Supply voltage
V
DC
VDC to GND, IGBT mode 14.5 15 15.5 V
Supply voltage
V
CC
VCC to GND 14.5 15 15.5 V
Electrical Characteristics (IGBT mode)
All data refer to +25°C and V
CC
= V
DC
= 15V unless otherwise specified.
Power supply Remarks Min Typ Max Unit
Supply current I
DC
Without load 70 mA
Supply current I
CC
f = 0Hz 25 mA
Supply current I
CC
f = 100kHz 34 mA
Coupling capacitance C
io
Primary to output, total 19 pF
Power Supply Monitoring Remarks Min Typ Max Unit
Supply threshold V
CC
Primary side, clear fault 11.9 12.6 13.3 V
Primary side, set fault (Note 12) 11.3 12.0 12.7 V
Monitoring hysteresis Primary side, set/clear fault 0.35 V
Supply threshold V
ISOx
-V
Ex
Secondary side, clear fault 12.1 12.6 13.1 V
Secondary side, set fault (Note 13) 11.5 12.0 12.5 V
Monitoring hysteresis Secondary side, set/clear fault 0.35 V
Supply threshold V
Ex
-V
COMx
Secondary side, clear fault 5 5.15 5.3 V
Secondary side, set fault (Note 13) 4.7 4.85 5 V
Monitoring hysteresis Secondary side, set/clear fault 0.15 V
Logic Inputs and Outputs Remarks Min Typ Max Unit
Input bias current V(INx) > 3V 190 µA
Turn-on threshold V(INx) 2.6 V
Turn-off threshold V(INx) 1.3 V
SOx output voltage Failure condition, I(SOx)<20mA 0.7 V
Short-Circuit Protection Remarks Min Typ Max Unit
Current through pin REFx R(REFx, VEx)<70kΩ 150 µA
Minimum response time Note 9 1.5 µs
Minimum blocking time Note 10 9 µs