2009R1C8.25 Datasheet 5NLE20E, 5NLE100E, 5NLE2250E | P1-P3

POWR-GARD

Fuse Datasheet

Products

Rev: 120816

1 of 10

MEDIUM VOLTAGE FUSES

2,400-38,000 VAC • Current-Limiting

Bolt-in Mount Fuses

Description

Littelfuse

offers a selection of E- and R-rated medium

voltage fuses for the protection of trans formers, potential

transformers, feeders, and motor circuits. Single, double,

and triple barrel designs are available to cover a wide range

of current, voltage, and interrupting ratings. Conventional

ferrule type, clip lock, and bolt-in mounting conﬁgurations

are available for virtually any application. Hermetically sealed

fuses for use in hazardous environments are also offered.

Contact the factory or your local Littelfuse representative for

additional fuse ratings or custom mounting conﬁgurations.

24-Hour Emergency Service - Call 800-227-0029

Applications

• Power Transformer Protection

• Potential Transformer Protection

• Motor Controller Back-up Protection

• Fused Switches

• Feeder Circuits

General Information

The terms “Medium Voltage” and “High Voltage” have been

used interchangeably by many people to describe fuses

operating above 600 volts. Technically speaking, medium

voltage fuses are those intended for the voltage range from

2,400 to 38,000 Vac. High voltage fuses are for circuits

carrying voltages greater than 38,000 Vac.

E-rated fuses are considered to be general purpose fuses

and can be used to protect against low and high values

of fault current. R-rated fuses are designed for back-up

protection. They must be used in series with other devices

such as motor overload relays in order to achieve both

overload and short-circuit protection.

Medium voltage fuses are not intended to provide overload

protection in the same sense as fuses rated 600 volts or

less. Medium voltage fuse current ratings do not have the

same meanings as the ampere ratings of low voltage fuses.

All medium voltage fuses are limited in their ability to

interrupt low value overcurrents, especially those between

100% and 200% of the fuse’s continuous current rating.

They are designed to carry their rated current without

exceeding the temperature rise permitted by NEMA and

ANSI standards.

Current-limiting E- and R-rated

fuses are equipped with a

mechanical indicator or striker pin

that protrudes through the fuse

cap upon operation of the fuse.

This provides visual identiﬁcation

of a blown fuse and can be used

as a trigger for external devices.

Note: Extension distance

2” minimum;

extension force 2 lb. minimum.

POWR-GARD

Fuse Datasheet

Products

Rev: 120816

2 of 10

Description

R-rated fuses provide required short-circuit protection for

medium voltage motors, motor controllers and associated

circuitry. These components have limited ability to absorb the

energy of large short-circuit currents. Medium voltage motor

controllers contain overload relays which provide both overload

protection and locked rotor protection to the motor. The

controllers are also intended to interrupt low value short-circuits

within the capability of the motor controller. This protects the

medium voltage fuse from sustained overcurrents which are

less than their minimum interrupting rating.

NEMA Standards for R-rated medium voltage power fuses

require they operate within 15-35 seconds when subjected

to an rms current 100 times the R rating. For example, a

fuse with a 2R rating will open within 15 to 35 seconds on

an applied current of 2 x 100 = 200 amperes.

Ordering Number

3"DIA

Dim.A

Clip

Center

6.38"

Dim.B

9.75"

D DD DDD

Figure 1 Figure 2 Figure 3

Hookeye Feature*

For hookeye attachment; add “W” suffix

to part number

* See web for Bolt Mount, Inverted Bolt Mount, and Bolt-In dimensions

Max Voltage (KV)

Style:

C (Cartridge)

B (Bolt Mount)

IB (Inverted Bolt Mount)

BI (Bolt-In Mount)

No. of Barrels

Rating (size)

Continuous Current

Characteristics

Voltage Ratings 2,750 V – 8,250 V

Current Range 2R – 36R

Options

• Hermetically sealed for use in hazardous locations

(add “S” sufﬁx to part number)

• Bolt-in mounting conﬁgurations

Bolt Mount “B”

Sample Part #: 130-4R-1B-5.5

Inverted-Bolt “IB”

Sample Part #: 130-4R-1IB-5.5

Bolt-In Mount “BI”

Sample Part #: 130-4R-1BI-5.5

Cartridge “C”

Dimensions

Medium Voltage

Fuse Protection

POWR-GARD

medium

voltage fuses provide

short-circuit protection

for motors and

transformers rated

2,400 to 38,000 volts AC.

Visit littelfuse.com/MediumVoltage to

download the white paper featuring protection

tables, sizing recommendations, and applications.

130-4R-1C-5.5

R-RATED MEDIUM VOLTAGE FUSES

POWR-GARD

Fuse Datasheet

Products

Rev: 120816

3 of 10

RATED

ORDERING/

CATALOG

NUMBER

SIZE

MAXIMUM

CONTINUOUS

CURRENT @

40 DEGREES C°

DIM. A

(INCHES)

DIM. B

(INCHES)

MINIMUM

INTERRUPTING

RATING RMS

AMPS

MAXIMUM

INTERRUPTING

RATING RMS

(ASYM)*

FIGURE

NUMBER

5.5 KV

702R1C5.5 2R 70 12" 15.875" 170 80,000 1

1003R1C5.5 3R 100 12" 15.875" 250 80,000 1

1304R1C5.5 4R 130 12" 15.875" 340 80,000 1

1505R1C5.5 5R 150 12" 15.875" 390 80,000 1

1706R1C5.5 6R 170 12" 15.875" 500 80,000 1

2009R1C5.5 9R 200 12" 15.875" 760 80,000 1

23012R1C5.5 12R 230 12" 15.875" 1000 80,000 1

39018R2C5.5 18R 390 12" 15.875" 1500 80,000 2

45024R2C5.5 24R 450 12" 15.875" 1950 80,000 2

48026R2C5.5 26R 480 12" 15.875" 2100 80,000 2

55030R2C5.5 30R 550 12" 15.875" 2400 80,000 2

60032R2C5.5 32R 600 12" 15.875" 2600 80,000 2

65036R2C5.5 36R 650 12" 15.875" 2900 80,000 2

55030R3C5.5 30R 550 12" 15.875" 2400 80,000 3

60032R3C5.5 32R 600 12" 15.875" 2600 80,000 3

65036R3C5.5 36R 650 12" 15.875" 2900 80,000 3

RATED

ORDERING/

CATALOG

NUMBER

SIZE

MAXIMUM

CONTINUOUS

CURRENT @

40 DEGREES C°

DIM. A

(INCHES)

DIM. B

(INCHES)

MINIMUM

INTERRUPTING

RATING RMS

AMPS

MAXIMUM

INTERRUPTING

RATING RMS

(ASYM)*

FIGURE

NUMBER

8.25 KV

702R1C8.25 2R 70 12" 15.875" 190 80,000 1

1003R1C8.25 3R 100 12" 15.875" 225 80,000 1

1304R1C8.25 4R 130 12" 15.875" 330 80,000 1

1505R1C8.25 5R 150 12" 15.875" 440 80,000 1

1706R1C8.25 6R 170 12" 15.875" 500 80,000 1

2009R1C8.25 9R 200 12" 15.875" 740 80,000 1

23012R1C8.25 12R 230 12" 15.875" 955 80,000 1

39018R2C8.25 18R 390 12" 15.875" 1440 80,000 2

45024R2C8.25 24R 450 12" 15.875" 1910 80,000 2

RATED

ORDERING/

CATALOG

NUMBER

SIZE

MAXIMUM

CONTINUOUS

CURRENT @

40 DEGREES C°

DIM. A

(INCHES)

DIM. B

(INCHES)

MINIMUM

INTERRUPTING

RATING RMS

AMPS

MAXIMUM

INTERRUPTING

RATING RMS

(ASYM)*

FIGURE

NUMBER

5.5 KV

14”CLIP CENTERS

702R1C5.5X 2R 70 14" 17.875" 170 80,000 1

1003R1C5.5X 3R 100 14" 17.875" 250 80,000 1

1304R1C5.5X 4R 130 14" 17.875" 340 80,000 1

1505R1C5.5X 5R 150 14" 17.875" 390 80,000 1

1706R1C5.5X 6R 170 14" 17.875" 500 80,000 1

2009R1C5.5X 9R 200 14" 17.875" 760 80,000 1

23012R1C5.5X 12R 230 14" 17.875" 1000 80,000 1

39018R2C5.5X 18R 390 14" 17.875" 1500 80,000 2

45024R2C5.5X 24R 450 14" 17.875" 1950 80,000 2

55030R2C5.5X 30R 550 14” 17.8 75” 2400 80,000 2

RATED

ORDERING/

CATALOG

NUMBER

SIZE

MAXIMUM

CONTINUOUS

CURRENT @

40 DEGREES C°

DIM. A

(INCHES)

DIM. B

(INCHES)

MINIMUM

INTERRUPTING

RATING RMS

AMPS

MAXIMUM

INTERRUPTING

RATING RMS

(ASYM)*

FIGURE

NUMBER

2.75 KV

702R1C2.75 2R 70 7" 10.875" 170 80,000 1

1003R1C2.75 3R 100 7" 10.875" 250 80,000 1

1304R1C2.75 4R 130 7" 10.875" 340 80,000 1

1505R1C2.75 5R 150 7" 10.875" 390 80,000 1

1706R1C2.75 6R 170 7" 10.875" 500 80,000 1

2009R1C2.75 9R 200 7" 10.875" 760 80,000 1

23012R1C2.75 12R 230 7" 10.875" 1000 80,000 1

39018R2C2.75 18R 390 7" 10.875" 1500 80,000 2

45024R2C2.75 24R 450 7" 10.875" 1950 80,000 2

* RMS Asymmetrical amperes = RMS Symmetrical amperes x 1.6

For hookeye attachment add “W” suffix to part number

R-RATED MEDIUM VOLTAGE FUSES

P1-P3 P4-P6 P7-P9 P10-P10

2009R1C8.25

Mfr. #:

Buy 2009R1C8.25

Manufacturer:

Littelfuse

Description:

Specialty Fuses V A Limiting 8.25kV

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

2009R1C8.25

2009R1C8.25

Products related to this Datasheet