A157
DF15 Series●0.65mm Pitch SMT Board to Board Connector
■Product Specifications
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for
a specific part number shown.
Note: The gold plated product of pin herder consists of a contact area of gold plated and lead of tin plated
Rating
Current rating : 0.3A
Operating Temperature Range : –35 to +85ç
(
Note 1.
)
Storage Temperature Range : –10 to +60ç
(
Note 2.
)
Voltage rating : 50V AC Operating Humidity Range : 40 to 80% Storage Humidity Range : 40 to 70%
(
Note 2.
)
■Material
Item Specification Condition
1. Insulation Resistance 500M ohms min. 100V
DC
2. Withstanding Voltage
No flashover or insulation breakdown.
150V AC/1 minute
3. Contact Resistance 50m ohms max 100mA
4. Vibration
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5.
Humidity (Steady state)
Contact resistance: 50m ohms max. Insulation resistance:250M ohms min.
96 hours at temperature of 40ç and humidity of 90% to 95%
6. Temperature Cycle
Contact resistance : 50m ohms max. (-55ç: 30 minutes 5 to 35ç: 10 minutes
Insulation resistance: 500M ohms min. (-85ç: 30 minutes 5 to 35ç: 10 minutes) 5 cycles
7.
Durability (Mating/un-mating)
Contact resistance: 50m ohms max. 50 cycles
8.
Resistance to Soldering heat
No deformation of components affecting performance.
Reflow: At the recommended temperature profile
Manual soldering: 350ç for 3 seconds
Product Part Material Finish Remarks
Insulator Polyamide Beige
UL94V-0
Receptacle Contact Phosphor copper Gold plated –––––––
Metal fitting Brass Tin plated –––––––
Insulator Polyamide Beige
UL94V-0
Header Contact Phosphor copper Gold plated –––––––
Metal fitting Brass Tin plated –––––––
DF15
##
(
****
)
-
**
DS - 0.65 V
(
****
)
qewrtyui
■Ordering Information
●Receptacle/Header
q Series Name : DF15
w Type
e Product height
Receptacle : 0.8, 1.8
Header : 3.2, 4.2, 6.2
r Number of Contacts
20, 30, 40, 50
t Connector Type
DS : Double-row receptacle
DP : Double-row header
y Contact Pitch : 0.65mm
u Contact type
V : Straight SMT type
i
(
56
)
: Embossed tape packaging
Fitting Boss
Blank KK
A
∞ K
B K
∞
C ∞∞