9FGV1005 Datasheet
13©2018 Integrated Device Technology, Inc. May 30, 2018
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its affiliated companies (herein referred to as “IDT”) reserve the right to modify the products and/or specifications described herein at any time,
without notice, at IDT’s sole discretion. Performance specifications and operating parameters of the described products are determined in an independent state and are not guaranteed to perform the same
way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability
of IDT's products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not
convey any license under intellectual property rights of IDT or any third parties.
IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be rea-
sonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.
Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the property
of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. Integrated Device Technology, Inc. All rights reserved.
Tech Support
www.IDT.com/go/support
Sales
1-800-345-7015 or 408-284-8200
Fax: 408-284-2775
www.IDT.com/go/sales
Corporate Headquarters
6024 Silver Creek Valley Road
San Jose, CA 95138 USA
www.IDT.com
Ordering Information
“G” indicates RoHS 6.6 compliance.
“nnn” are decimal digits indicating a specific configuration.
“hh” are hexadecimal digits indicating a specific configuration.
“Q5” indicates 50MHz internal crystal.
Revision History
Orderable Part Number Package Carrier Type Temperature
9FGV1005AnnnLTGI 3 × 3 mm, 0.5mm pitch 16-LGA Tray -40 to +85°C
9FGV1005AnnnLTGI8 3 × 3 mm, 0.5mm pitch 16-LGA Reel -40 to +85°C
9FGV1005Q5hhLTGI 3 × 3 mm, 0.5mm pitch 16-LGA Tray -40 to +85°C
9FGV1005Q5hhLTGI8 3 × 3 mm, 0.5mm pitch 16-LGA Reel -40 to +85°C
Revision Date Description of Change
May 30, 2018 Removed “Programmable output amplitude...” bullet.
February 6, 2018 Updated pin 15 description.
January 31, 2018 Updated drive level parameter in Crystal Characteristics table.
January 25, 2018
▪ Updated pinout diagram to show pin 10 as NC on the “Q” version.
▪ Updated package outline drawings and reference text.
October 5, 2017
▪ Updated Key Specifications.
▪ Updated Common Electrical Characteristics table.
▪ Updated PCIe Phase Jitter specs.
August 29, 2017
▪ Updated thermal values.
▪ Updated typical phase jitter values.
▪ Updated values in table 10 and 11.
▪ Updated the “Total Power Down Current Conditions” section.
▪ Removed footnotes from table 12.
▪ Added mark spec for the Q5 version.
July 24, 2017 Initial release.
