VS-30TPS16LHM3

VS-30TPS16LHM3
www.vishay.com
Vishay Semiconductors
Revision: 22-Feb-18
4
Document Number: 96491
For technical questions within your region: DiodesAmericas@vishay.com
, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current
Fig. 7 - On-State Voltage Drop Characteristics
Fig. 8 - Thermal Impedance Z
thJC
Characteristics
120
140
160
180
200
220
240
260
280
1 10 100
Number Of Equal Amplitude Half Cycle Current Pulses (N)
At any rated load condition and with
rated V
RRM
applied following surge.
Peak Half Sine Wave On-state Current (A)
Initial T = 125 °C
at 60 Hz 0.0083 s
at 50 Hz 0.0100 s
J
120
140
160
180
200
220
240
260
280
300
0.01 0.1 1
Peak Half Sine Wave On-state Current (A)
Pulse Train Duration (s)
vs. pulse train duration. Control
of conduction may not be maintained.
Initial T
J
= 125 °C
No voltage reapplied
Rated V reapplied
RRM
Maximum non repetitive surge current
1
10
100
1000
0 1 2 3 4 5 6 7
T = 25 °C
J
Instantaneous On-state Current (A)
Instantaneous On-state Voltage (V)
T = 125 °C
J
0.01
0.1
1
0.0001 0.001 0.01 0.1 1
Square Wave Pulse Duration (s)
Steady state value
(DC operation)
Single pulse
D = 0.50
D = 0.33
D = 0.25
D = 0.17
D = 0.08
Transient Thermal Impedance Z (°C/W)
thJC
VS-30TPS16LHM3
www.vishay.com
Vishay Semiconductors
Revision: 22-Feb-18
5
Document Number: 96491
For technical questions within your region: DiodesAmericas@vishay.com
, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 9 - Gate Characteristics
ORDERING INFORMATION TABLE
ORDERING INFORMATION (Example)
PREFERRED P/N QUANTITY PER T/R MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION
VS-30TPS16LHM3 25 500 Antistatic plastic tubes
LINKS TO RELATED DOCUMENTS
Dimensions www.vishay.com/doc?95626
Part marking information www.vishay.com/doc?95007
0.01
0.1
1
0.0001 0.001 0.01 0.1 1
Square Wave Pulse Duration (s)
Steady state value
(DC operation)
Single pulse
D = 0.50
D = 0.33
D = 0.25
D = 0.17
D = 0.08
Transient Thermal Impedance Z (°C/W)
thJC
2
- Current rating (30 = 30 A)
3
- Circuit conguration:
4
- Package:
5
T = thyristor
- Type of silicon:
6
- Voltage rating (16 = 1600 V)
P = TO-247
S = standard recovery rectier
Device code
62
1
43 5 7 8
9
30T P S 16 L HM3VS-
1 - Vishay Semiconductors product
7
- Package L = long lead
8
- H = AEC-Q101 qualified
9
-
Environmental digit:
M3 = halogen-free, RoHS-compliant, and terminations lead (Pb)-free
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 08-Feb-17
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

VS-30TPS16LHM3

Mfr. #:
Manufacturer:
Vishay Semiconductors
Description:
SCRs 20A If; 1600V Vr TO-247AD 3L
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet