OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MC10E416FNG

P1-P3P4-P6P7-P9
MC10E416, MC100E416
http://onsemi.com
7
Figure 3. Typical Termination for Output Driver and Device Evaluation
(See Application Note AND8020/D ï Termination of ECL Logic Devices.)
Driver
Device
Receiver
Device
QD
Q D
Z
o
= 50 W
Z
o
= 50 W
50 W 50 W
V
TT
V
TT
= V
CC
ï 2.0 V
ORDERING INFORMATION
Device Package Shipping
†
MC10E416FN PLCCï28 37 Units / Rail
MC10E416FNG PLCCï28
(PbïFree)
37 Units / Rail
MC10E416FNR2 PLCCï28 500 / Tape & Reel
MC10E416FNR2G PLCCï28
(PbïFree)
500 / Tape & Reel
MC100E416FN PLCCï28 37 Units / Rail
MC100E416FNG PLCCï28
(PbïFree)
37 Units / Rail
MC100E416FNR2 PLCCï28 500 / Tape & Reel
MC100E416FNR2G PLCCï28
(PbïFree)
500 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
Resource Reference of Application Notes
AN1405/D ï ECL Clock Distribution Techniques
AN1406/D ï Designing with PECL (ECL at +5.0 V)
AN1503/D ï
ECLinPSt I/O SPiCE Modeling Kit
AN1504/D ï Metastability and the ECLinPS Family
AN1568/D ï Interfacing Between LVDS and ECL
AN1672/D ï The ECL Translator Guide
AND8001/D ï Odd Number Counters Design
AND8002/D ï Marking and Date Codes
AND8020/D ï Termination of ECL Logic Devices
AND8066/D ï Interfacing with ECLinPS
AND8090/D ï AC Characteristics of ECL Devices
MC10E416, MC100E416
http://onsemi.com
8
PACKAGE DIMENSIONS
PLCCï28
FN SUFFIX
PLASTIC PLCC PACKAGE
CASE 776ï02
ISSUE E
ïNï
ïMï
ïLï
V
W
D
D
Y BRK
28 1
VIEW S
S
L−M
S
0.010 (0.250) N
S
T
S
L−M
M
0.007 (0.180) N
S
T
0.004 (0.100)
G1
G
J
C
Z
R
E
A
SEATING
PLANE
S
L−M
M
0.007 (0.180) N
S
T
ïTï
B
S
L−M
S
0.010 (0.250) N
S
T
S
L−M
M
0.007 (0.180) N
S
T
U
S
L−M
M
0.007 (0.180) N
S
T
Z
G1X
VIEW DïD
S
L−M
M
0.007 (0.180) N
S
T
K1
VIEW S
H
K
F
S
L−M
M
0.007 (0.180) N
S
T
NOTES:
1. DATUMS −L−, −M−, AND −N− DETERMINED
WHERE TOP OF LEAD SHOULDER EXITS
PLASTIC BODY AT MOLD PARTING LINE.
2. DIMENSION G1, TRUE POSITION TO BE
MEASURED AT DATUM −T−, SEATING PLANE.
3. DIMENSIONS R AND U DO NOT INCLUDE
MOLD FLASH. ALLOWABLE MOLD FLASH IS
0.010 (0.250) PER SIDE.
4. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
5. CONTROLLING DIMENSION: INCH.
6. THE PACKAGE TOP MAY BE SMALLER THAN
THE PACKAGE BOTTOM BY UP TO 0.012
(0.300). DIMENSIONS R AND U ARE
DETERMINED AT THE OUTERMOST
EXTREMES OF THE PLASTIC BODY
EXCLUSIVE OF MOLD FLASH, TIE BAR
BURRS, GATE BURRS AND INTERLEAD
FLASH, BUT INCLUDING ANY MISMATCH
BETWEEN THE TOP AND BOTTOM OF THE
PLASTIC BODY.
7. DIMENSION H DOES NOT INCLUDE DAMBAR
PROTRUSION OR INTRUSION. THE DAMBAR
PROTRUSION(S) SHALL NOT CAUSE THE H
DIMENSION TO BE GREATER THAN 0.037
(0.940). THE DAMBAR INTRUSION(S) SHALL
NOT CAUSE THE H DIMENSION TO BE
SMALLER THAN 0.025 (0.635).
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A 0.485 0.495 12.32 12.57
B 0.485 0.495 12.32 12.57
C 0.165 0.180 4.20 4.57
E 0.090 0.110 2.29 2.79
F 0.013 0.019 0.33 0.48
G 0.050 BSC 1.27 BSC
H 0.026 0.032 0.66 0.81
J 0.020 −−− 0.51 −−−
K 0.025 −−− 0.64 −−−
R 0.450 0.456 11.43 11.58
U 0.450 0.456 11.43 11.58
V 0.042 0.048 1.07 1.21
W 0.042 0.048 1.07 1.21
X 0.042 0.056 1.07 1.42
Y −−− 0.020 −−− 0.50
Z 2 10 2 10
G1 0.410 0.430 10.42 10.92
K1 0.040 −−− 1.02 −−−
__ __
MC10E416, MC100E416
http://onsemi.com
9
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800ï282ï9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81ï3ï5773ï3850
MC10E416/D
ECLinPS is a trademark of Semiconductor Components Industries, LLC (SCILLC).
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303ï675ï2175 or 800ï344ï3860 Toll Free USA/Canada
Fax: 303ï675ï2176 or 800ï344ï3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
P1-P3P4-P6P7-P9

MC10E416FNG

Mfr. #:
Buy MC10E416FNG
Manufacturer:
ON Semiconductor
Description:
Bus Receivers 5V ECL Quint Diff Line RCVR
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet