LIS302SG Application hints
13/19
4.1 Soldering information
The LGA package is compliant with the ECOPACK
®
, RoHs and “Green” standard.
It is qualified for soldering heat resistance according to JEDEC J-STD-020C.
Leave “Pin 1 Indicator” unconnected during soldering.
Land pattern and soldering recommendations are available at www.st.com/mems
.
4.2 Output response vs. orientation
Figure 4. Output response vs. orientation
Figure 4 refers to LIS302SG powered at 3.3 V.
Table 6. Filter capacitor selection, C
load
(x,y,z)
Cut-off frequency Capacitor value
1 Hz 5 µF
10 Hz 0.5 µF
20 Hz 250 nF
50 Hz 100 nF
100 Hz 50 nF
200 Hz 25 nF
500 Hz 10 nF
Table 7. Mux I/O table
S1 pin S0 pin Mux status
0 0 Vout = Voutx
0 1 Vout = Vouty
1 0 Vout = Voutz
11 Vout = Aux_in
Earth’s Surface
X=1.65V (0g)
Y=1.65V (0g)
Z=2.13V (+1g)
X=1.65V (0g)
Y=1.65V (0g)
Z=1.17V (-1g)
X=1.17V (-1g)
Y=1.65V (0g)
X=2.13V (+1g)
Y=1.65V (0g)
X=1.65V (0g)
Y=1.17V (-1g)
X=1.65V (0g)
Y=2.13V (+1g)
Z=1.65V (0g)
Z=1.65V (0g)
Z=1.65V (0g)
Z=1.65V (0g)
Top
Bottom
Top
Bottom
Obsolete Product(s) - Obsolete Product(s)