TLP754(F) Datasheet TLP754(F), TLP754(TP1,F) | P10-P12

TLP754F

10

14.

14. Marking

Marking

2016-02-29

Rev.4.0

TLP754F

11

15.

15. EN60747-5-5 Option (D4) Specification

EN60747-5-5 Option (D4) Specification

• Part number: TLP754, TLP754F (Note 1)

(Note 1)

• The following part naming conventions are used for the devices that have been qualified according to

option (D4) of EN60747.

Example: TLP754F(D4-TP4, F)

D4 : EN60747 option

TP4: Tape type

F : `G`/RoHS COMPATIBLE (Note 2)

(Note 2)

Note 1: Use TOSHIBA standard type number for safety standard application.

e.g., TLP754F(D4-TP4,F) → TLP754

Note 2: Please contact your Toshiba sales representative for details on environmental information such as the product's

RoHS compatibility.

RoHS is the Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the

restriction of the use of certain hazardous substances in electrical and electronics equipment.

Fig.

Fig. 15.1

15.1

15.1 EN60747 Isolation Characteristics

EN60747 Isolation Characteristics

2016-02-29

Rev.4.0

TLP754F

12

Fig.

Fig. 15.2

15.2

15.2 Insulation Related Specifications (Note)

Insulation Related Specifications (Note)

Note: If a printed circuit is incorporated, the creepage distance and clearance may be reduced below this value. (e.

g., at a standard distance between soldering eye centers of 7.5 mm). If this is not permissible, the user shall

take suitable measures.

Note: This photocoupler is suitable for safe electrical isolation

safe electrical isolation

safe electrical isolation only within the safety limit data.

Maintenance of the safety data shall be ensured by means of protective circuits.

Fig.

Fig. 15.3

15.3

15.3 Marking Example (Note)

Marking Example (Note)

Note: The above marking is applied to the photocouplers that have been qualified according to option (D4) of

EN60747.(Fig15.3)

2016-02-29

Rev.4.0

TLP754(F)

TLP754(F)

Products related to this Datasheet