Integrated Silicon Solution, Inc. — www.issi.com
7
Rev. B
02/02/2012
IS61NLP102436A/IS61NVP102436A
IS61NLP204818A/IS61NVP204818A
POWER SUPPLY CHARACTERISTICS
(1)
(Over Operating Range)
-200 -166
MAX MAX
Symbol Parameter Test Conditions
Temp. range x18 x36 x18 x36 Uni
t
ICC AC Operating Device Selected, Com. 450 450 400 400 mA
Supply Current OE = VIH, ZZ ≤ VIL, Ind. 475 475 450 450
All Inputs ≤ 0.2V or ≥ VDD – 0.2V, typ.
(2)
390 340
Cycle Time ≥ tKC min.
ISB Standby Current Device Deselected, Com. 260 260 250 250 mA
TTL Input VDD = Max., Ind. 270 270 260 260
All Inputs ≤ VIL or ≥ VIH,
ZZ ≤ VIL, f = Max.
ISBI Standby Current Device Deselected, Com. 105 105 105 105 mA
CMOS Input VDD = Max., Ind. 110 110 110 110
VIN
≤
VSS + 0.2V or ≥VDD – 0.2V typ.
(2)
30 30
f = 0
Note:
1. MODE pin has an internal pullup and should be tied to V
DD or VSS. It exhibits ±100µA maximum leakage current when tied to ≤
V
SS + 0.2V or ≥ VDD – 0.2V.
2. Typical values are measured at Vcc = 3.3V, TA = 25
o
C and not 100% tested.
DC ELECTRICAL CHARACTERISTICS (Over Operating Range)
3.3V 2.5V
Symbol Parameter Test Conditions Min. Max. Min. Max. Unit
V
OH Output HIGH Voltage IOH = –4.0 mA (3.3V) 2.4 — 2.0 — V
IOH = –1.0 mA (2.5V)
VOL Output LOW Voltage IOL = 8.0 mA (3.3V) — 0.4 — 0.4 V
IOL = 1.0 mA (2.5V)
VIH Input HIGH Voltage 2.0 VDD + 0.3 1.7 VDD + 0.3 V
VIL Input LOW Voltage –0.3 0.8 –0.3 0.7 V
ILI Input Leakage Current VSS ≤ VIN ≤ VDD
(1)
–5 5 –5 5 µA
ILO Output Leakage Current VSS ≤ VOUT ≤ VDDQ, OE = VIH –5 5 –5 5 µA
