VJ....31 / VJ....34 Automotive MLCC
www.vishay.com
Vishay Vitramon
Alternative Device Available, See GA....31G and GA....34G Automotive MLCC
Revision: 31-Jan-17
19
Document Number: 45040
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
6.4 MOUNTING, DIMENSIONS AND TESTING
6.5 PERFORMANCE OF THE TEST(S)
A) Electrical test according to component specification (Cap, DF, IR)
B) Mounting to PCB
C) Storage at room temperature (min. 10 h)
D) Board flex test
6.6 DETAILS
6.7 FAILURE CRITERIA
X7R, X8R PCB to be deflected continuously, speed 1 mm/s (± 0.5 mm/s)
C0G
PCB to be deflected in steps until cracks or other damages are visible or can be measured. Dwell time between
steps: (5 ± 1) s
X7R, X8R Piezoelectric sensor, no failures up to min. 2 mm
C0G (NP0) C/C < 1 % or < 1 pF, no failures up to min. 2 mm
Both Electrical test according to component specification
SMD under test
Solder
Support
1.6 ± 0.1
90 ± 1
45 ± 2
Printed board
before test
R = 3
++
Mounting
+
+
Material: Aluminum
20
Printed board
during test
Width = actual width
of substrate + 5 mm
on both sides
Radius
1 to 2
Width
1.5 ± 0.1
0
All dimensions in mm
10 ± 0.1
Testing
VJ....31 / VJ....34 Automotive MLCC
www.vishay.com
Vishay Vitramon
Alternative Device Available, See GA....31G and GA....34G Automotive MLCC
Revision: 31-Jan-17
20
Document Number: 45040
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
7 - AEC-Q200 QUALIFICATION TESTING
NO. AEC-Q200 TEST ITEM REFERENCE
1 Pre- and post stress electrical test User spec
3 High temp exposure (storage) MIL-STD-202, method 108
4 Temperature cycling JESD22, method JA-104
5 Destructive physical analysis EIA-469
6 Moisture resistance MIL-STD-202, method 106
7 Biased humidity MIL-STD-202, method 103
8 Operation life MIL-STD-202 method 108
9 External Visual MIL-STD-883 method 2009
10 Physical dimension JESD22, method JB-100
13 Mechanical shock MIL-STD-202, method 213
14 Vibration MIL-STD-202, method 204
15 Resistance to solder heat MIL-STD-202, method 215
16 ESD AEC-Q200 rev. C
17 Solderability J-STD-002
20 Electrical characterization User spec
21 Board flex AEC-Q200-005
22 Terminal strength AEC-Q200-006
23 Beam load AEC-Q200-003
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 08-Feb-17
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

VJ0603Y222KXCAC31

Mfr. #:
Manufacturer:
Vishay
Description:
Multilayer Ceramic Capacitors MLCC - SMD/SMT 0603 2200pF 200volts X7R 10%
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union