© Semiconductor Components Industries, LLC, 2006
March, 2006 -- Rev. 11
1 Publication Order Number:
NCV8800/D
NCV8800 Series
Synchr onous Buck Regulator
with 1.0 Amp Switch
The NCV8800 is an automotive synchronous step--down buck
regulator. This part provides an efficient step--down voltage compared
to linear regulators. The NCV8800 uses very few external components
allowing for maximum use of printed circuit board space.
Features
• Output Voltage Options: 2.6 V, 3.3 V, 5.0 V, 7.5 V
• ±3.0% Output
• 3.5 V Operation
• AUXILIARY Hold Up Pin (for Cranking Conditions)
• On--Chip Switching Power Devices (0.4 Ω R
DS(ON)
)
• Constant Frequency
• Synchronous Operation
• On --Chip Charge Pump Control Circuitry
• Nonoverlap Logic
• Power Up Sequencing Control Option (2.6 V and 3.3 V Only)
• ENABLE Battery Voltage Capable Option
• Selectable Reset Delay
• Dual Pin Feedback Connection
• V
2
™ Control Topology
• Internally Fused Leads in SO--16L Package
• NCV Prefix for Automotive and Other Applications Requiring Site
and Change Control
• These devices are available in Pb--free package(s). Specifications herein
apply to both standard and Pb--free devices. Please see our website at
www.onsemi.com for specific Pb--free orderable part numbers, or
contact your local ON Semiconductor sales office or representative.
Typical Applications
• Telecommunications
• Mobile Multimedia
• Instrumentation
• Automotive Entertainment Systems
SO--16L
DW SUFFIX
CASE 751G
1
16
NCV8800xy
AWLYYWW
COMPFB2
1
16
NCFB1
V
IN2
DELAY
GNDGND
GNDGND
SWITCH
RESET
CPENABLE
V
IN
AUXILIARY
PIN CONNECTIONS AND
MARKING DIAGRAM
x = Voltage Ratings as Indicated Below:
2=2.6V
3=3.3V
5=5.0V
7=7.5V
y = ENABLE Option as Indicated Below:
S = Sequenced
H = High Voltage
A = Assembly Location
WL, L = Wafer Lot
YY, Y = Year
WW, W = Work Week
See detailed ordering and shipping informationinthepackage
dimensions section on page 12 of this data sheet.
ORDERING INFORMATION
http://onsemi.com
