OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

GP1S52VJ000F

P1-P3P4-P6P7-P9P10-P12
7
Sheet No.: D3-A02501FEN
GP1S52VJ000F
Fig.13 Detecting Position Characteristics (1) Fig.14
Detecting Position Characteristics (2)
Relative collector current (%)
Shield moving distance L (mm)
−1.5
0
50
100
−1 −0
.5 0 0.5 1 1.5 2 2.5
Sensor
Shield
L
+−
I
F
=20mA, V
CE
=5V
T
a
=25˚C
0
Relative collector current (%)
−3
0
50
100
−2 −1012345
−
+
0
L
Shield
Sensor
I
F
=20mA, V
CE
=5V
T
a
=25˚C
Shield moving distance L (mm)
Remarks : Please be aware that all data in the graph are just for reference and not for guarantee.
8
Sheet No.: D3-A02501FEN
GP1S52VJ000F
■
Design Considerations
●
Design guide
1) Prevention of detection error
To prevent photointerrupter from faulty operation caused by external light, do not set the detecting face to
the external light.
2) Position of opaque board
Opaque board shall be installed at place 4mm or more from the top of elements.
(Example)
This product is not designed against irradiation and incorporates non-coherent IRED.
●
Degradation
In general, the emission of the IRED used in photocouplers will degrade over time.
In the case of long term operation, please take the general IRED degradation (50% degradation over 5
years) into the design consideration.
●
Parts
This product is assembled using the below parts.
• Photodetector (qty. : 1)
Category Material
Maximum Sensitivity
wavelength (nm)
Sensitivity
wavelength (nm)
Response time (μs)
Phototransistor Silicon (Si) 800 400 to 1 200 3
• Photo emitter (qty. : 1)
Category Material
Maximum light emitting
wavelength (nm)
I/O Frequency (MHz)
Infrared emitting diode
(non-coherent)
Gallium arsenide (GaAs) 950 0.3
• Material
Case Lead frame plating
Black NORYL resin Solder dip. (Sn−3Ag−0.5Cu)
4mm or more
9
Sheet No.: D3-A02501FEN
GP1S52VJ000F
■
Manufacturing Guidelines
●
Soldering Method
Flow Soldering:
Soldering should be completed below 260˚C and within 5 s.
Please take care not to let any external force exert on lead pins.
Please don't do soldering with preheating, and please don't do soldering by refl ow.
Hand soldering
Hand soldering should be completed within 3 s when the point of solder iron is below 350̊C.
Please solder within one time.
Please don't touch the terminals directly by soldering iron.
Soldered product shall treat at normal temperature.
Other notice
Please test the soldering method in actual condition and make sure the soldering works fine, since the
impact on the junction between the device and PCB varies depending on the cooling and soldering
conditions.
Flux
Some fl ux, which is used in soldering, may crack the package due to synergistic effect of alcohol in fl ux and
the rise in temperature by heat in soldering. Therefore, in using fl ux, please make sure that it does not have
any infl uence on appearance and reliability of the photointerrupter.
P1-P3P4-P6P7-P9P10-P12

GP1S52VJ000F

Mfr. #:
Buy GP1S52VJ000F
Manufacturer:
Sharp Microelectronics
Description:
Optical Switches, Transmissive, Phototransistor Output Photointerrupter Transmissive 3mm
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet