3
FN6508.4
February 15, 2013
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typ values are for information purposes only. Unless otherwise noted, all tests are
at the specified temperature and are pulsed tests, therefore: T
J
= T
C
= T
A
Absolute Maximum Ratings (T
A
= +25°C) Thermal Information
V
S
+ to V
S
- Supply Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30V
V
S
+ Voltage to Ground . . . . . . . . . . . . . . . . . . . . . . . .-0.3V to +30V
V
S
- Voltage to Ground . . . . . . . . . . . . . . . . . . . . . . . . . .-30V to 0.3V
Input DISAB, DISCD to Ground. . . . . . . . . . . . . . . . . . . . . . . . . . .7V
V
IN
+ Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V
S
- to V
S
+
Current into any Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8mA
Continuous Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . 75mA
ESD Rating
Human Body Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4kV
Machine Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .250V
Thermal Resistance (Typical, Note 4) θ
JA
(°C/W)
16 Lead QFN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Ambient Operating Temperature Range . . . . . . . . . .-40°C to +85°C
Storage Temperature Range . . . . . . . . . . . . . . . . . .-60°C to +150°C
Operating Junction Temperature . . . . . . . . . . . . . . . . . . . . . .+150°C
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See curves
Pb-Free Reflow Profile. . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
NOTE:
4. θ
JA
is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
Electrical Specifications V
S
= ±12V, R
L
= 50Ω to GND, DISAB = DISCD = 0, T
A
= +25°C, unless otherwise specified.
PARAMETER DESCRIPTION CONDITIONS
MIN
(Note 5) TYP
MAX
(Note 5) UNIT
AC PERFORMANCE
A
V
Gain 12.6 12.85 13.1 V/V
BW -3dB Bandwidth 50 MHz
THD Total Harmonic Distortion f = 1MHz, V
O
= 10Vo
P-P
- diff, R
L
= 50Ω to GND -69 dBc
f = 2.2MHz, V
O
= 10Vo
P-P
- diff, R
L
= 50Ω to GND -59 dBc
SR Slew Rate, Single-Ended Signal V
OUT
from -4.5V to +4.5V 200 400 V/µs
DC PERFORMANCE
V
OS-DM
Differential Mode Offset Voltage -50 +50 mV
V
OS-CM
Common Mode Offset Voltage -125 125 mV
INPUT CHARACTERISTICS
I
B
+ Non-Inverting Input Bias Current -5 +5 µA
e
N
Input Noise Voltage f = 10kHz 8.0 nV
√
Hz
i
N
+ +Input Noise Current f = 10kHz 1.0 pA/
√
Hz
RIN Input Resistance 67.59kΩ
V
IH
Input High Voltage DIS inputs 2.2 V
V
IL
Input Low Voltage DIS inputs 0.8 V
I
IH
Input High Current for DIS DIS = 5V 20 58 100 µA
I
IL
Input Low Current for DIS DIS = 0V -25 -7 0 µA
OUTPUT CHARACTERISTICS
V
OUT
-50 Loaded Output Swing Single-Ended R
L
= 50Ω to GND ±10.4 ±10.85 V
V
OUT
-30 Loaded Output Swing Single-Ended R
L
= 30Ω to GND ±9.8 ±10.4 V
V
OUT
-DIS Disable Output Voltage ±800 mV
I
OUT
Output Current R
L
= 0Ω 600 mA
ISL1536
