
April 2016 DocID028643 Rev 2 1/16
1
UM1985
User manual
VIP-M07-ADIS
Introduction
This document describes the specifications for the 12 V M0-7 discovery board that is able to
work connected to SPC560B-DIS discovery board to create a complete solution for a
specific 12 V BCM (Body Control Module) system.
In a typical car body application it is necessary to connect a microcontroller to drive several
loads (bulb lamps, led lamps, electrical motors, and so on). When using a bulb lamp, to
increase its lifetime and avoid flickering, it is necessary to shift PWM signals and adapt the
duty cycle to battery voltage.
The M0-7 expansion board provides diagnostics feedback and current consumptions to
operating close loop for each single load synchronized with the PWM signals. SPC560B-
DIS is the core hardware to generate shifted PWM signals and synchronize ADC
conversion.
www.st.com