OMO ElectronicOMO Electronic
Expand menu
0 Cart

VIP-M07-ADIS

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P16
List of figures UM1985
4/16 DocID028643 Rev 2
List of figures
Figure 1. VIP-M07-ADIS schematic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Figure 2. VIP-M07-ADIS top layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Figure 3. VIP-M07-ADIS bottom layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
DocID028643 Rev 2 5/14
UM1985 Overview
14
1 Overview
VIP-M07-ADIS is an easy-to-use board offered at budget price. Together with a dedicated
GUI and firmware (STSW-M07-ADIS) and in combination with SPC560B-DIS board, it
becomes a tool to evaluate M0-7 high-side drivers.
1.1 Getting started
Follow the sequence below to configure the system and launch the application:
1. Check jumper position in the SPC560B-DIS board:
– J14,J13,J12,J7,J6,J11,J5,J4 removed
– S1,S2,J10,J9,J2,J1,J3 inserted
2. Connect the SPC560B-DIS board to a PC with a USB cable ‘type A to mini-B’
3. Download firmware STSW-M07-ADIS and program board as described on www.st.com
4. Disconnect USB cable
5. Plug VIP-M07-ADIS board and connect 12 V power supply on J30
6. Install GUI on your PC as described on www.st.com
7. Connect loads to the outputs
8. Check jumper position in the VIP-M07-ADIS:
– J1,J7,J8,J29 – pin 2 connected to pin 1
– J2 inserted
9. Connect USB cable to PC
10. Execute GUI (www.st.com)
Overview UM1985
6/14 DocID028643 Rev 2
1.2 Hardware, schematic and layout
Figure 1. VIP-M07-ADIS schematic
Figure 2. VIP-M07-ADIS top layer
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P16

VIP-M07-ADIS

Mfr. #:
Buy VIP-M07-ADIS
Manufacturer:
STMicroelectronics
Description:
Power Management IC Development Tools M0-7 DISCOVERY
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet