For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LINEAR & POWER - SMT
7
HMC406MS8G / 406MS8GE
v06.0611
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 5 - 6 GHz
Evaluation PCB
The circuit board used in the application should
use RF circuit design techniques. Signal lines
should have 50 Ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
List of Materials for Evaluation PCB 104989
[1]
Item Description
J1 - J2 PCB Mount SMA RF Connector
J3 2mm DC Header
C1 - C3 330 pF Capacitor, 0603 Pkg.
C4 2.2 µF Capacitor, Tantalum
C5 0.6 pF Capacitor, 0603 Pkg.
C6 1.6 pF Capacitor, 0603 Pkg.
C7 100 pF Capacitor, 0603 Pkg.
L1 3.9 nH Inductor, 0603 Pkg.
U1 HMC406MS8G(E) Amplier
PCB
[2]
105021 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Roger 4350 or Arlon 25FR
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
