PIP250M
Integrated buck converter
Rev. 02 — 21 February 2003 Product data
M3D797
1. Description
The PIP250M is a fully integrated synchronous buck converter intended for use as a
point-of-load regulator. It contains two N-channel power MOSFETs, a Schottky diode
and a voltage mode, pulse width modulated (PWM) controller. The controller features
include overcurrent and overvoltage protection and undervoltage lockout functions.
By combining the power components and the controller into a single component,
stray inductances are virtually eliminated, resulting in lower switching losses and a
compact, efficient design with minimal external component count.
2. Features
■ Output current up to 15 A
■ Single supply 5 V operation
■ Fixed 300 kHz operating frequency
■ Voltage mode control
■ Minimum regulated output voltage 0.8 V
■ Internal soft start
■ Overcurrent protection
■ Overvoltage protection
■ Remote sensing.
3. Applications
■ High-current point-of-load regulation
■ Distributed power architectures
■ Multiple output telecom power supplies
■ Microprocessor and Digital Signal Processing (DSP) supplies
■ Computer peripheral supplies
■ Cable modems
■ Set-top boxes.
4. Ordering information
Table 1: Ordering information
Type number Package
Name Description Version
PIP250M HVQFN68 plastic, thermal enhanced very thin quad flat package; no leads;
68 terminals; body 10 × 10 × 0.85 mm
SOT687-1
