OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

ISL9011AIRMGZ

P1-P3P4-P6P7-P9P10-P12
1
FN6437.2
ISL9011A
Dual LDO with Low Noise, Low I
Q
and
High PSRR
ISL9011A is a high performance dual LDO capable of
sourcing 150mA current from Channel 1 and 300mA from
Channel 2. The device has a low standby current and
high-PSRR and is stable with output capacitance of 1µF to
10µF with ESR of up to 200mΩ.
A reference bypass pin allows an external capacitor for
adjusting a noise filter for low noise and high PSRR
applications.
The quiescent current is typically only 45µA with both LDOs
enabled and active. Separate enable pins control each
individual LDO output. When both enable pins are low, the
device is in shutdown, typically drawing less than 0.1µA.
Several combinations of voltage outputs are standard.
Output voltage options for each LDO range from 1.5V to
3.3V. Other output voltage options may be available upon
request.
Pinout
ISL9011A
(10 LD 3x3 DFN)
TOP VIEW
Features
• Integrates two high performance LDOs
- VO1 - 150mA output
- VO2 - 300mA output
• Excellent transient response to large current steps
• Excellent load regulation: <1% voltage change across full
range of load current
• High PSRR: 70dB @ 1kHz
• Wide input voltage capability: 2.3V to 6.5V
• Extremely low quiescent current: 45µA (both LDOs active)
• Low dropout voltage: typically 120mV @ 150mA
• Low output noise: typically 30µV
RMS
@ 100µA (1.5V)
• Stable with 1µF to 10µF ceramic capacitors
• Separate enable pins for each LDO
• Soft-start to limit input current surge during enable
• Current limit and overheat protection
• ±1.8% accuracy over all operating conditions
• Tiny 10 Ld 3mmx3mm DFN package
• -40°C to +85°C operating temperature range
• Pin compatible with Micrel MIC2211
• Pb-free (RoHS compliant)
Applications
• PDAs, Cell Phones and Smart Phones
• Portable Instruments, MP3 Players
• Handheld Devices including Medical Handhelds
VIN
EN1
EN2
CBYP
NC
VO1
VO2
NC
NC
GND
2
3
4
1
5
9
8
7
10
6
Data Sheet September 1, 2015
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
| Intersil (and design) is a registered trademark of Intersil Americas LLC
Copyright Intersil Americas LLC 2007, 2008, 2015. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.
2
FN6437.2
September 1, 2015
Ordering Information
PART NUMBER
(Notes 1, 2, 3)
PART
MARKING
VO1 VOLTAGE
(V)
VO2 VOLTAGE
(V)
TEMP
RANGE (°C)
PACKAGE
(Pb-free)
PKG.
DWG. #
ISL9011AIRNNZ DGPA 3.3 3.3 -40 to +85 10 Ld 3x3 DFN L10.3x3C
ISL9011AIRNJZ DGNA 3.3 2.8 -40 to +85 10 Ld 3x3 DFN L10.3x3C
ISL9011AIRNFZ DGMA 3.3 2.5 -40 to +85 10 Ld 3x3 DFN L10.3x3C
ISL9011AIRNCZ (No longer available,
recommended replacement: ISL9011AIRMNZ-T)
DGLA 3.3 1.8 -40 to +85 10 Ld 3x3 DFN L10.3x3C
ISL9011AIRMNZ DGKA 3.0 3.3 -40 to +85 10 Ld 3x3 DFN L10.3x3C
ISL9011AIRMMZ (No longer available,
recommended replacement: ISL9011AIRMGZ-T)
DGJA 3.0 3.0 -40 to +85 10 Ld 3x3 DFN L10.3x3C
ISL9011AIRMGZ DGHA 3.0 2.7 -40 to +85 10 Ld 3x3 DFN L10.3x3C
ISL9011AIRKNZ (No longer available,
recommended replacement: ISL9011AIRKKZ-T)
DGEA 2.85 3.3 -40 to +85 10 Ld 3x3 DFN L10.3x3C
ISL9011AIRKKZ DGDA 2.85 2.85 -40 to +85 10 Ld 3x3 DFN L10.3x3C
ISL9011AIRKJZ DGCA 2.85 2.8 -40 to +85 10 Ld 3x3 DFN L10.3x3C
ISL9011AIRKFZ DGBA 2.85 2.5 -40 to +85 10 Ld 3x3 DFN L10.3x3C
ISL9011AIRKPZ (No longer available,
recommended replacement: ISL9011AIRKKZ-T)
DGFA 2.85 1.85 -40 to +85 10 Ld 3x3 DFN L10.3x3C
ISL9011AIRKCZ DFYA 2.85 1.8 -40 to +85 10 Ld 3x3 DFN L10.3x3C
ISL9011AIRJNZ DFVA 2.8 3.3 -40 to +85 10 Ld 3x3 DFN L10.3x3C
ISL9011AIRJMZ (No longer available,
recommended replacement: ISL9011AIRJNZ-T)
DFTA 2.8 3.0 -40 to +85 10 Ld 3x3 DFN L10.3x3C
ISL9011AIRJRZ (No longer available,
recommended replacement: ISL9011AIRJNZ-T)
DWFA 2.8 2.6 -40 to +85 10 Ld 3x3 DFN L10.3x3C
ISL9011AIRJCZ (No longer available,
recommended replacement: ISL9011AIRJBZ-T)
DFSA 2.8 1.8 -40 to +85 10 Ld 3x3 DFN L10.3x3C
ISL9011AIRJBZ DFRA 2.8 1.5 -40 to +85 10 Ld 3x3 DFN L10.3x3C
ISL9011AIRFJZ DFMA 2.5 2.8 -40 to +85 10 Ld 3x3 DFN L10.3x3C
ISL9011AIRFDZ DFLA 2.5 2.0 -40 to +85 10 Ld 3x3 DFN L10.3x3C
ISL9011AIRFCZ DFKA 2.5 1.8 -40 to +85 10 Ld 3x3 DFN L10.3x3C
ISL9011AIRCJZ DFJA 1.8 2.8 -40 to +85 10 Ld 3x3 DFN L10.3x3C
ISL9011AIRCCZ DFHA 1.8 1.8 -40 to +85 10 Ld 3x3 DFN L10.3x3C
NOTES:
1. Add “-T” suffix for tape and reel. Please refer to TB347 for details on reel specifications.
2. For availability and lead time of devices with voltage combinations not listed in the table, contact Intersil Marketing.
3. These Intersil Pb-free plastic packaged products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte
tin plate PLUS ANNEAL - e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations.
Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC
J STD-020.
ISL9011A
3
FN6437.2
September 1, 2015
Absolute Maximum Ratings Thermal Information
Supply Voltage (VIN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +7.1V
V
O
1, V
O
2 Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +3.6V
All Other Pins . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to (V
IN
+ 0.3)V
Recommended Operating Conditions
Ambient Temperature Range (T
A
) . . . . . . . . . . . . . . .-40°C to +85°C
Supply Voltage (VIN) . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3V to 6.5V
Thermal Resistance (Notes 4, 5) θ
JA
(°C/W) θ
JC
(°C/W)
10 Ld 3x3 DFN Package . . . . . . . . . . . 50 10
Junction Temperature Range . . . . . . . . . . . . . . . . .-40°C to +125°C
Operating Temperature Range . . . . . . . . . . . . . . . . .-40°C to +85°C
Storage Temperature Range . . . . . . . . . . . . . . . . . . -65°C to +150°C
Pb-free reflow profile . . . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
NOTES:
4. θ
JA
is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See
Tech Brief TB379.
5. For θ
JC
, the “case temp” location is the center of the exposed metal pad on the package underside.
Electrical Specifications Unless otherwise noted, all parameters are guaranteed over the operational supply voltage and temperature
range of the device as follows: T
A
= -40°C to +85°C; V
IN
= (V
O
+ 1.0V) to 6.5V with a minimum V
IN
of 2.3V;
C
IN
= 1µF; C
O
= 1µF; C
BYP
= 0.01µF
PARAMETER SYMBOL TEST CONDITIONS
MIN
(Note 7) TYP
MAX
(Note 7) UNITS
DC CHARACTERISTICS
Supply Voltage V
IN
2.3 6.5 V
Ground Current Quiescent condition: I
O1
= 0µA; I
O2
= 0µA
I
DD1
One LDO active 25 40 µA
I
DD2
Both LDO active 45 60 µA
Shutdown Current I
DDS
@ +25°C 0.1 1.0 µA
UVLO Threshold V
UV+
1.9 2.1 2.3 V
V
UV-
1.6 1.8 2.0 V
Regulation Voltage Accuracy Variation from nominal voltage output, V
IN
= V
O
+ 0.5 to 5.5V,
T
J
= -40°C to +125°C
-1.8 +1.8 %
Line Regulation V
IN
= (V
OUT
+ 1.0V relative to highest output voltage) to 5.5V -0.2 0 0.2 %/V
Load Regulation I
OUT
= 100µA to 150mA (VO1 and VO2) 0.1 0.7 %
I
OUT
= 100µA to 300mA (VO2) 1.0 %
Maximum Output Current I
MAX
VO1: Continuous 150 mA
VO2: Continuous 300 mA
Internal Current Limit I
LIM
350 475 600 mA
Dropout Voltage (Note 6) V
DO1
I
O
= 150mA; V
O
> 2.1V (VO1) 125 200 mV
V
DO2
I
O
= 300mA; V
O
< 2.5V (VO2) 300 500 mV
V
DO3
I
O
= 300mA; 2.5V ≤ V
O
≤ 2.8V (VO2) 250 400 mV
V
DO4
I
O
= 300mA; V
O
> 2.8V (VO2) 200 325 mV
Thermal Shutdown Temperature T
SD+
145 °C
T
SD-
110 °C
AC CHARACTERISTICS
Ripple Rejection I
O
= 10mA, V
IN
= 2.8V(min), V
O
= 1.8V, C
BYP
= 0.1µF
@ 1kHz 70 dB
@ 10kHz 55 dB
@ 100kHz 40 dB
Output Noise Voltage I
O
= 100μA, V
O
= 1.5V, T
A
= +25°C, C
BYP
= 0.1µF
BW = 10Hz to 100kHz
30 µV
RMS
ISL9011A
P1-P3P4-P6P7-P9P10-P12

ISL9011AIRMGZ

Mfr. #:
Buy ISL9011AIRMGZ
Manufacturer:
Renesas / Intersil
Description:
LDO Voltage Regulators W/ANNEAL LW NOISE HI PSRRLDO 10LD 3X3
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet