This is information on a product in full production.
January 2017 DocID027938 Rev 3 1/28
VND5004CSP30
Double 4 mȍ high-side driver with analog CurrentSense for
automotive applications
Datasheet - production data
Features
x AEC-Q100 qualified
x General
– Inrush current active management by
power limitation
– Very low stand-by current
– 3.0 V CMOS compatible input
– Optimized electromagnetic emission
– Very low electromagnetic susceptibility
– In compliance with the 2002/95/EC
European directive
x Diagnostic functions
– Proportional load current sense
– Current sense disable
– Thermal shutdown indication
x Protection
– Undervoltage shutdown
– Overvoltage clamp
– Load current limitation
– Thermal shutdown
– Self limiting of fast thermal transients
– Protection against loss of ground and loss
of V
CC
– Reverse battery protection with self switch-
on of the PowerMOS
– Electrostatic discharge protection
Applications
x All types of resistive, inductive and capacitive
loads
x Suitable for power management applications
Description
The device is a double channel high-side driver
manufactured using STMicroelectronics
proprietary VIPower
®
M0-5 technology. It is
intended for driving resistive or inductive loads
with one side connected to ground. Active V
CC
pin voltage clamp and load dump protection
circuit protect the devices against transients on
the V
CC
pin.
The device integrates an analog current sense
which delivers a current proportional to the load
current (according to a known ratio) when
CS_DIS is driven low or left open. When CS_DIS
is driven high, the CURRENT SENSE pin is high
impedance.
Output current limitation protects the devices in
overload condition. In case of long duration
overload, the device limits the dissipated power to
a safe level up to thermal shutdown intervention.
Thermal shutdown with automatic restart allows
the device to recover normal operation as soon as
a fault condition disappears.
Max transient supply voltage V
CC
41 V
Operating voltage range V
CC
4.5 to 27 V
Max On-State resistance (per ch.) R
ON
4 mȍ
Current limitation (typ) I
LIMH
100 A
Off state supply current I
S
2 μA
(1)
1. Typical value with all loads connected
0XOWL3RZHU6
*$3*&)7
www.st.com