OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

PL-BYTEBLASTER2N

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P26
Chapter 2: ByteBlaster II Specifications 2–3
ByteBlaster II Connections
© July 2008 Altera Corporation ByteBlaster II Download Cable User Guide
ByteBlaster II 10-Pin Header Connection
The 10-pin female plug connects to a 10-pin male header on the circuit board.
Figure 2–2 shows the dimensions of the female plug.
Table 2–3 identifies the 10-pin female plug signal names and the corresponding
programming mode.
5 nCE Cyclone chip enable — No connect — No connect
8 ASDI Active serial data in DATA0 Data to device TDI Data to device
11 CONF_DONE Configuration done CONF_DONE Configuration
done
TDO Data from device
13 DATAOUT Active serial data out nSTATUS Signal status — No connect
15 nVCC
Detect
— nVCC
Detect
— nVCC
Detect
—
18 to 25 GND Signal ground GND Signal ground GND Signal ground
Table 2–2. ByteBlaster II 25-Pin Header Pin-Outs (Part 2 of 2)
Figure 2–2. ByteBlaster II 10-Pin Female Plug Dimensions
0.250 Typ.
0.700 Typ.
0.425 Typ.
0.100 Sq.
10
9
8
7
6
5
4
3
2
1
0.025 Sq.
Dimensions are shown in inches. Spacing between pin centers is 0.1 inches.
Table 2–3. ByteBlaster II Female Plug Signal Names and Programming Modes (Part 1 of 2)
Pin
AS Mode PS Mode JTAG Mode
Signal Name Description Signal Name Description Signal Name Description
1 DCLK Clock signal DCLK Clock signal TCK Clock signal
2 GND Signal ground GND Signal ground GND Signal ground
3 CONF_DONE Configuration done CONF_DONE Configuration done TDO Data from device
4 VCC(TRGT) Target power supply VCC(TRGT) Target power supply VCC(TRGT) Target power
supply
5 nCONFIG Configuration control nCONFIG Configuration control TMS JTAG state
machine control
6 nCE Cyclone chip enable — No connect — No connect
7 DATAOUT Active serial data out nSTATUS Configuration status — No connect
8 nCS Serial configuration
device chip select
— No connect — No connect
2–4 Chapter 2: ByteBlaster II Specifications
Operating Conditions
ByteBlaster II Download Cable User Guide © July 2008 Altera Corporation
1 The circuit board must supply VCC(TRGT) and ground to the ByteBlaster II cable for
the I/O drivers.
Circuit Board Header Connection
The circuit board’s 10-pin male header has two rows of five pins connected to the
device’s programming or configuration pins. Figure 2–3 shows the dimensions of a
typical 10-pin male header.
1 Although a 10-pin surface mount header can be used for the JTAG, AS or PS
download cable, Altera recommends using a through-hole connector due to the
repeated insertion and removal force needed.
Operating Conditions
Table 2–4 through Table 2–6 summarize the maximum ratings, recommended
operating conditions, and DC operating conditions for the ByteBlaster II cable.
9 ASDI Active serial data in DATA0 Data to device TDI Data to device
10 GND Signal ground GND Signal ground GND Signal ground
Table 2–3. ByteBlaster II Female Plug Signal Names and Programming Modes (Part 2 of 2)
Figure 2–3. 10-Pin Male Header Dimensions
0.025 Sq
.
0.235
0.100
0.100
Dimensions are shown in inches.
Top View Side View
Table 2–4. ByteBlaster II Cable Absolute Maximum Ratings (Note 1)
Symbol Parameter Conditions Min Max Unit
V
CC(TRGT)
Target supply voltage With respect to ground –0.3 5.5 V
I
I
Input current TDO or dataout –10.0 10.0 mA
I
o
Output current TCK, TMS, TDI, nCS, nCE –20.0 20.0 mA
Note to Table 2–4:
(1) The operating conditions are identical for both leaded and lead-free ByteBlaster II download cables.
Chapter 2: ByteBlaster II Specifications 2–5
Statement of China-RoHS Compliance
© July 2008 Altera Corporation ByteBlaster II Download Cable User Guide
1 The RoHS sticker on the ByteBlaster II download cable reflects the hardware upgrade
to meet the RoHS lead-free requirement.
Statement of China-RoHS Compliance
Table 2–7 lists hazardous substances included with the lead-free ByteBlaster II
download cable.
Table 2–5. ByteBlaster II Cable Recommended Operating Conditions (Note 1)
Symbol Parameter Conditions Min Max Unit
V
CC(TRGT)
Target supply voltage, 5.0-V operation — 4.75 5.25 V
Target supply voltage, 3.3-V operation — 3.0 3.6 V
Target supply voltage, 2.5-V operation — 2.375 2.625 V
Target supply voltage, 1.8-V operation — 1.71 1.89 V
Target supply voltage, 1.5-V operation — 1.43 1.57 V
Note to Table 2–5:
(1) The operating conditions are identical for both leaded and lead-free ByteBlaster II download cables.
Table 2–6. ByteBlaster II Cable DC Operating Conditions (Note 1)
Symbol Parameter Conditions Min Max Unit
V
IH
High-level input voltage — VCC(TRGT) –0.2 — V
V
IL
Low-level input voltage — — 0.15 V
V
OH
5.0-V high-level output voltage VCC(TRGT) = 4.5 V, IOH = 8 mA 4.4 — V
3.3-V high-level output voltage VCC(TRGT) = 3.0 V, IOH = 4 mA 2.9 — V
2.5-V high-level output voltage VCC(TRGT) = 2.375 V, IOH = 2 mA 2.275 — V
1.8-V high-level output voltage VCC(TRGT) = 1.71 V, IOH = 2 mA 1.61 — V
1.5-V high-level output voltage VCC(TRGT) = 1.43 V, IOH = 2 mA 1.33 — V
V
OL
5.0-V low-level output voltage VCC(TRGT) = 5.5 V, IOL = 8 mA — 0.125 V
3.3-V low-level output voltage VCC(TRGT) = 3.6 V, IOL = 4 mA — 0.125 V
2.5-V low-level output voltage VCC(TRGT) = 2.625 V, IOL = 2 mA — 0.125 V
1.8-V low-level output voltage VCC(TRGT) = 1.89 V, IOL = 2 mA — 0.125 V
1.5-V low-level output voltage VCC(TRGT) = 1.57 V, IOL = 2 mA — 0.125 V
I
CC (TRGT)
Operating current (No Load) (Typical ICC = 80 mA) — 150 mA
Note to Table 2–6:
(1) The DC operating conditions are identical for both leaded and lead-free ByteBlaster II download cables.
Table 2–7. Table of Hazardous Substances’ Name and Concentration (Note 1)
Part Name Lead (Pb) Cadmium (Cd)
Hexavalent
Chromium
(Cr6+) Mercury (Hg)
Polybrominated
biphenyls (PBB)
Polybrominated
diphenyl Ethers
(PBDE)
Electronic
Components
0000 0 0
Populated
Circuit Board
0000 0 0
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P26

PL-BYTEBLASTER2N

Mfr. #:
Buy PL-BYTEBLASTER2N
Manufacturer:
Intel / Altera
Description:
Programmer Accessories PARALLEL Prog Cable FPGA CPLD & Ser Conf
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet