• Current range from 24 to 105 amps
• Frequency range up to 1MHz
• RoHS compliant
Applications
• Multi-phase regulators
• Voltage Regulator Module (VRM)
• Desktop and server VRMs and EVRDs
• Data networking and storage systems
• Notebook regulators
• Graphics cards and battery power systems
• Point of load modules
• DCR current sensing
Environmental Data
• Storage temperature range: -40°C to +125°C
• Operating temperature range: -40°C to +125°C
(with derated current)
• Solder reflow temperature: J-STD-020D compliant
Packaging
• Supplied in tape-and-reel packaging, 744 parts per reel,
13” diameter reel
Description
• Halogen Free
• 125°C maximum total operating temperature
• 7.0 x 15.0 x 5.0mm surface mount package
• Ferrite core material
• High current handling capability, low core loss
• Designed for high speed, high current switch mode applications
• Controlled DCR tolerance for sensing circuits
• Inductance range from 100nH to 400nH
High Current, High Frequency, Power Inductors
FLAT-PAC™ FP1505 Series
0409 BU-SB09350 Page 1 of 4 Data Sheet: 4365
SMD Device
SMD Device
1 Open Circuit Inductance (OCL) Test Parameters: 100kHz, 1.0V
rms
, 0.0Adc
2 Full Load Inductance (FLL) Test Parameters: 100kHz, 1.0V
rms
,I
sat
1
3I
rms
: DC current for an approximate temperature rise of 40°C without core loss. Derating is
necessary for AC currents. PCB layout, trace thickness and width, air-flow, and proximity of other
heat generating components will affect the temperature rise. It is recommended that the
temperature of the part not exceed 125°C under worst case operating conditions verified in the
end application.
4I
sat
1: Peak current for approximately 20% rolloff at +25°C.
5I
sat
2: Peak current for approximately 20% rolloff at +125°C.
6 K-factor: Used to determine B
p-p
for core loss (see graph). B
p-p
= K * L * ΔI * 10
-3
.B
p-p
:(Gauss), K:
(K-factor from table), L: (Inductance in nH), ΔI (Peak-to-peak ripple current in amps).
7 Part Number Definition: FP1505Rx-Rxx-R
• FP1505 = Product code and size
• Rx= DCR indicator
• Rxx= Inductance value in uH, R = decimal point
• -R suffix = RoHS compliant
Product Specifications
Part OCL
1
FLL
2
I
rms
3
I
sat
1
4
I
sat
2
5
DCR (mΩ)
Number
7
± 10% (nH) Min. (nH) (Amps) (Amps) @25°C (Amps) @125°C @20°C K-factor
6
FP1505R1-R10-R 100 72 105 90 356.3
FP1505R1-R12-R 120 86 87 75 356.3
FP1505R1-R15-R 150 108
53
72 60
0.47 ± 7%
356.3
FP1505R1-R25-R 250 180 42 32 356.3
FP1505R1-R30-R 300 217 35 26 356.3
FP1505R1-R40-R 400 288 24 19.5 356.3
