1/21November 2004
VNQ830-E
QUAD CHANNEL HIGH SIDE DRIVER
Rev. 2
Table 1. General Features
(*) Per each channel
■
CMOS COMPATIBLE INPUTS
■ OPEN DRAIN STATUS OUTPUTS
■ ON STATE OPEN LOAD DETECTION
■ OFF STATE OPEN LOAD DETECTION
■ SHORTED LOAD PROTECTION
■ UNDERVOLTAGE AND OVERVOLTAGE
SHUTDOWN
■ LOSS OF GROUND PROTECTION
■ VERY LOW STAND-BY CURRENT
■ REVERSE BATTERY PROTECTION (**)
■ IN COMPLIANCE WITH THE 2002/95/EC
EUROPEAN DIRECTIVE
DESCRIPTION
The VNQ830-E is a quad HSD formed by
assembling two VND830-E chips in the same SO-
28 package. The VNQ830-E is a monolithic device
made by using| STMicroelectronics VIPower M0-3
Technology. The VNQ830-E is intended for driving
any type of multiple loads with one side connected
to ground. Active V
CC
pin voltage clamp protects
the device against low energy spikes (see
ISO7637 transient compatibility table).
Figure 1. Package
Active current limitation combined with thermal
shutdown and automatic restart protects the
device against overload.
The device detects open load condition both in on
and off state. Output shorted to V
CC
is detected in
the off state. Device automatically turns off in case
of ground pin disconnection.
Table 2. Order Codes
Note: (**) See application schematic at page 10
Type R
DS(on)
I
out
V
CC
VNQ830-E 60mΩ (*) 6A (*) 36V
SO-28 (DOUBLE ISLAND)
Package Tube Tape and Reel
SO-28
VNQ830-E VNQ830TR-E
Obsolete Product(s) - Obsolete Product(s)
