GP1FAV51RK0F
■Absolute Maximum Ratings
*1 Solder at a position more than 1.6 mm away from the base of the lead terminal. Reflow is not available.
*2 Do not contact top of soldering iron to lead terminal directly.
Notes
(1) This operating transfer rate shall be a specification when NRZ, duty 50 % of continuous “0101···” signal is transferred.
(2) The output (H/L Level) of this product are not fixed constantly when it receivers the modulating light
(including DC light, no input light) less than 0.1 Mb/s.
■Recommended Operating Conditions
■Electro-optical Characteristics
Sheet No.: E2-A01301EN
(T
a
= 25 °C, V
CC
= 5 V)
Parameter Symbol Rating Unit Remark
Supply voltage
°
C
6 s or less/time up to 2 times.
4 s or less/time up to 1 time.
Soldering by hand at each terminal. *2
Parameter Symbol MIN. TYP. MAX. Unit Remark
Supply voltage
Operating transfer rate T 0.1 - 13.2 Mb/s Notes (1), (2)
Receiver input optical power level
P
C
-24.0 - -14.5 dBm Peak optical output
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Peak sensitivity wavelength
λ
p
- 700 - nm
I
CC
Measurement method refer to Fig. 1 - - 25 mA
High level output voltage
L
→
H delay time
t
pLH
--180ns
H
→
L delay time
t
pHL
--180ns
Pulse width distortion
Δt
w
-20 - +20 ns
Measurement method refer to Fig. 2, 3
Measurement method refer to Fig. 4, 5,
PC = -14.5 dBm
Measurement method refer to Fig. 4, 5,
PC = -24 dBm