OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

GP1FAV51RK0F

P1-P3P4-P6P7-P9
GP1FAV51RK0F
■Measurement Method
Fig. 1 Supply Current
Sheet No.: E2-A01301EN
Fiber optic cable
GP1FAV51RK0F Device under testStandard transmitter
Input
V
in
V
CC
GND
V
CC
GND
V
out
V
CC
Ammeter
5V
A
Judgment method
Supply voltage
V
CC
= 5.0 V
Optical fiber coupling light output
P
C
= -14.5 dBm
Input conditions
Standard transmitter input signal
13.2 Mb/s NRZ, Duty 50 % or
6.6 Mb/s bi-phase mark PRBS signal
Measured on an ammeter
(DC mean amperage)
4
GP1FAV51RK0F
Fig. 2 Output Voltage and Pulse Response
Fig. 3 Input and Output Signal
Sheet No.: E2-A01301EN
Fiber optic cable
Standard transmitter
GP1FAV51RK0F Device under test
V
CC
Input
V
in
V
CC
GND
GND
V
out
V
CC
5V
R
so
R
si
13.2 Mb/s NRZ, Duty 50 %
CH1
CH2
Tektronix 7834 or
7934 type Oscilloscope
Standard Transmitter
50%
Input signal (CH1)
GP1FAV51RK0F
Output signal (CH2)
90%
50%
10%
t
pLH
t
pHL
t
r
V
oH
V
oL
Notes
(1) V
CC
= 5.0V (State of operating)
(2) The fiber coupling light output set at –14.5 dBm or –24.0 dBm.
(3) The probe for the oscilloscope must be more than 1 MΩ and less than 10 pF.
(4) R
si
, R
so
: Standard load resistor (R
si
: 3.3 kΩ, R
so
: 2.2 kΩ)
(5) The output (H/L level) of this device are not fixed constantly when it receivers
the modulating light (including DC light, no input light) less than 0.1 Mb/s.
t
f
5
GP1FAV51RK0F
Fig. 4 Pulse Response and Jitter
Fig. 5 Input Signal (6.6 Mb/s Bi-phase PRBS Signal)
Sheet No.: E2-A01301EN
Fiber optic cable
V
CC
R
si
GND
GP1FAV51RK0F Device under test
Tektronix 7834 or 7934 type Oscilloscope
Trigger ; CH1
Mode ; Storage mode
Sweep ; AUTO/NORM
CH2
CH1
Standard transmitter
V
CC
V
out
R
so
V
in
V
CC
GND
5V
Input
Input signal
6.6 Mb/s bi-phase PRBS signal
Input signal
GP1FAV51RK0F output
50%
50%
Δt
j
Δt
j
Notes
(1) The fiber coupling light output set at –14.5 dBm or –24.0 dBm.
(2) R
si
, R
so
: Standard load resistor (R
si
: 3.3 kΩ, R
so
: 2.2 kΩ)
(3) Set the oscilloscope to the storage mode and write time to 3 seconds.
Do not allow the brightness to be increased too much. The waveform would be distorted.
(4) V
CC
= 5.0 V (State of operating)
(5) The probe for the oscilloscope must be more than 1 MΩ and less than 10 pF.
6
P1-P3P4-P6P7-P9

GP1FAV51RK0F

Mfr. #:
Buy GP1FAV51RK0F
Manufacturer:
Sharp Microelectronics
Description:
Fiber Optic Transmitters, Receivers, Transceivers Reciever Screw Fixing 5V 13.2Mbps
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet