REVISION HISTORY R8C/10 Group Datasheet
Rev. Date Description
Page Summary
A-1
1.00 Jun. 19, 2003 First edition issued
1.10 Sep. 08, 2003 Table 1.1: Shortest instruction execution time and f(XIN) changed
____________
Figure 1.3: Pin name changed from TXOUT to CNTR0
____________
Table 1.3: Pin name changed from TXOUT to CNTR0
The value of Time C register after reset changed
Chapter 5. Electrical Characteristics added
2
5
6
12
14
1.20 Oct. 31, 2003
Table 1.1: Power consumption values added
Table 1.3: Resistor value for CNVss and MODE deleted
Table 5.2: Note 3 and Note 4 deleted
tsamp in Table 5.3 deleted
Figure 5.1 added
Table 5.7: Vcc changed from 4.2 to 5.5V to 3.3V to 5.5V, on-chip oscillator
changed from on 100kHz to 125kHz, XIN=5MHz deleted and XIN=10MHz added
in high-speed mode and medium-speed mode, data added and modified
Table 5.8 to Table 5.12 added
Figure 5.2 added
Table 5.13: Note 1, f(BCLK)=5 MHz changed to 10 MHz
Table 5.14: on-chip oscillator changed from on 100kHz to 125kHz, XIN=5MHz
deleted and XIN=10MHz added in high-speed mode and medium-speed mode, data
added and modified
Table 5.15 to Table 5.19 added
Figure 5.3 added
2
6
14
15
16
18
19
20
21
22
23
24
1.30 Dec 05, 2003 4 Table 1.2 : ** deleted
15 Table 5.4 revised
1.40 Sep 30, 2004 All pages Words standardized (on-chip oscillator, serial interface, A/D)
2 Table 1.1 revised
5 Figure 1.3, NOTES 3 added
6 Table 1.3 revised
10-13 One body sentence in chapter 4 added ; Titles 4.1 to 4.4 added
12 Table 4.3 revised ; Table 4.4 revised
14 Table 5.2 revised
15 Table 5.3 revised ; Table 5.4 revised
17 Table 5.6 revised
18 Table 5.7 revised
19 Table 5.8 revised ; Table 5.12 revised
21 Table 5.13 revised
22 Table 5.14 revised
23 Table 5.15 revised ; Table 5.17 revised ; Table 5.19 revised
1.50 Apr.27.2005 4 Table 1.2, Figure 1.2 package name revised
5 Figure 1.3 package name revised
10 Table 4.1 revised
REVISION HISTORY R8C/10 Group Datasheet
Rev. Date Description
Page Summary
A-2
1.50 Apr.27.2005 12 Table 4.3 revised
15 Table 5.3 partly revised
Table 5.4 partly added
Table 5.5 partly revised
17 Table 5.6 partly revised
21 Table 5.13 partly revised
25 Package Dimensions revised
1.60
Jan.27.2006
2 Table 1.1 Performance outline revised
3 Figure 1.1 Block diagram partly revised
4 1.4 Product Information, title of Table 1.2
“Product List” “Product Informaton” revised
Figure 1.2 Type No., Memory Size, and Package partly revised
6 Table 1.3 Pin description revised
7-8 2 Central Processing Unit (CPU) revised
Figure 2.1 CPU register revised
10 Table 4.1 SFR Information(1) NOTES:1 revised
11 Table 4.2 SFR Information(2) NOTES:1 revised
12 Table 4.3 SFR Information(3);
008116: “Prescaler Y” “Prescaler Y Register”
008216: “Timer Y Secondary” “Timer Y Secondary Register”
008316: “Timer Y Primary” “Timer Y Primary Register”
008516: “Prescaler Z” “Prescaler Z Register”
008616: “Timer Z Secondary” “Timer Z Secondary Register”
008716: “Timer Z Primary” “Timer Z Primary Register”
008C16: “Prescaler X” “Prescaler X Register” revised
NOTES:1 revised
13 Table 4.4 SFR Information(4) NOTES:1 revised
14 Table 5.2 Recommended Operating Conditions; NOTES: 1, 2, 3 revised
15 Table 5.3 A/D Conversion Characteristics;
“A/D operation clock frequency” “A/D operating clock frequency” revised
NOTES: 1, 2, 3, 4 revised
Table 5.4 Flash Memory (Program ROM) Electrical Characteristics;
“Data retention duration” “Data hold time” revised
“Topr” “Ambient temperature” revised
NOTES: 2 added
Measuring condition of byte program time and block erase time deleted
17 Table 5.6 Electrical Characteristics (1) [V
CC
=5V];
“P10 to P17 Except XOUT “Except P10 to P17, XOUT” revised
18 Table
5.7 Electrical Characteristics (2) [V
CC
=5V]
NOTES: 1, 2 revised
Measuring condition: Stop mode
Topr = 25 °C
21 Table 5.13 Electrical Characteristics (3) [V
CC
=3V]
“P10 to P17 Except XOUT “Except P10 to P17, XOUT” revised
22 Table
5.14 Electrical Characteristics (4) [V
CC
=3V]
NOTES: 1, 2 revised
Measuring condition: Stop mode
Topr = 25 °C
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble
may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary
circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor
home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater
use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and
cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
http://www.renesas.com
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology (Shanghai) Co., Ltd.
Unit 205, AZIA Center, No.133 Yincheng Rd (n), Pudong District, Shanghai 200120, China
Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2730-6071
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
Renesas Technology Malaysia Sdn. Bhd
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510
RENESAS SALES OFFICES
© 2006. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .5.0

R5F21103FP#U0

Mfr. #:
Manufacturer:
Renesas Electronics
Description:
16-bit Microcontrollers - MCU MCU 3/5V 12K Pb-Free 32-LQFP
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet