28
AT42QT1085 [DATASHEET]
9625D–AT42–05/2013
Associated Documents
Design layout guidelines:
Application Note: QTAN0079 – Buttons, Sliders and Wheels Sensor Design Guide
Haptics guidelines:
Application Note: QTAN0085 – Haptics Design Guide
Miscellaneous:
Application Note: QTAN0015 – Power Supply Considerations for QT ICs
Application Note: Atmel AVR3000: QTouch Conducted Immunity
Design Guide: QTAN0087 – Proximity Design Guide
Revision History
Revision Number History
Revision AX – May 2011 Initial release for firmware version 0.4
Revision BX – August 2011
Firmware version 0.5
Amendments and clarifications to text.
Revision C – December 2011
Firmware version 1.0.AA
Amendments and clarifications to text.
Revision D – May 2013
Amendments and clarifications to text
New template and package mechanical drawings
Changed package designation from MLF to QFN
29
AT42QT1085 [DATASHEET]
9625D–AT42–05/2013
Atmel Corporation
1600 Technology Drive
San Jose, CA 95110
USA
Tel: (+1) (408) 441-0311
Fax: (+1) (408) 487-2600
www.atmel.com
Atmel Asia Limited
Unit 01-5 & 16, 19F
BEA Tower, Millennium City 5
418 Kwun Tong Roa
Kwun Tong, Kowloon
HONG KONG
Tel: (+852) 2245-6100
Fax: (+852) 2722-1369
Atmel München GmbH
Business Campus
Parkring 4
D-85748 Garching bei München
GERMANY
Tel: (+49) 89-31970-0
Fax: (+49) 89-3194621
Atmel Japan G.K.
16F Shin-Osaki Kangyo Bldg
1-6-4 Osaki, Shinagawa-ku
Tokyo 141-0032
JAPAN
Tel: (+81) (3) 6417-0300
Fax: (+81) (3) 6417-0370
© 2010 – 2013 Atmel Corporation. All rights reserved. / Rev.: 9625D–AT42–05/2013
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this
document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL
ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF
INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no
representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and products descriptions at any
time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be
used in, automotive applications. Atmel products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.
Atmel
®
, Atmel logo and combinations thereof, Adjacent Key Suppression
®
, AKS
®
, QTouch
®
and others are registered trademarks or trademarks of Atmel
Corporation or its subsidiaries. Other terms and product names may be registered trademarks or trademarks of others.

AT42QT1085-MUR

Mfr. #:
Manufacturer:
Microchip Technology / Atmel
Description:
Capacitive Touch Sensors 8 Channel QTouch Haptic Sensor IC
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union