SL23EP09NZSC-1H

Rev 2.2, May 6, 2008 Page 10 of 11
SL23EP09NZ
Package Outline and Package Dimensions
8
0.150(3.810)
0.157(3.987)
0.230(5.842)
0.244(6.197)
0.386(9.804)
0.393(9.982)
0.050(1.270)
BSC
0.004(0.102)
Seating plane
0.004(0.102)
0.0098(0.249)
0.061(1.549)
0.068(1.727)
0° to 8°
0.010(0.2540)
0.016(0.406)
X 45°
0.016(0.406)
0.035(0.889)
0.0075(0.190)
0.0098(0.249)
Pin-1 ID
Dimensions are in inches (milimeters).
Top line: (MIN) and Bottom line: (Max)
16-Lead SOIC (150-Mil)
1
916
0.0138(0.350)
0.0192(0.487)
Thermal Characteristics
Parameter
Symbol
Condition
Min
Typ
Max
Unit
Thermal Resistance
Junction to Ambient
θ JA
Still air
-
78
-
°C/W
θ JA
1m/s air flow
-
74
-
°C/W
θ JA
3m/s air flow
-
70
-
°C/W
Thermal Resistance
Junction to Case
θ JC
Independent of air flow
-
44
-
°C/W
Not Recommended
for New Designs
Rev 2.2, May 6, 2008 Page 11 of 11
SL23EP09NZ
Ordering Information
[1]
Ordering Number
Marking
Shipping
Package
Package
Temperature
SL23EP09NZSC-1H
SL23EP09NZSC-1H
Tube
16-pin SOIC
0 to 70°C
SL23EP09NZSC-1HT
SL23EP09NZSC-1H
Tape and Reel
16-pin SOIC
0 to 70°C
SL23EP09NZSI-1H
SL23EP09NZSI-1H
Tube
16-pin SOIC
-40 to 85°C
SL23EP09NZSI-1HT
SL23EP09NZSI-1H
Tape and Reel
16-pin SOIC
-40 to 85°C
Notes:
1. The SL23EP09NZ products are RoHS compliant.
The information in this document is believed to be accurate in all respects at the time of publication but is subject to change without
notice. Silicon Laboratories assumes no responsibility for errors and omissions, and disclaims responsibility for any consequences
resulting from the use of information included herein. Additionally, Silicon Laboratories assumes no responsibility for the functioning
of undescribed features or parameters. Silicon Laboratories reserves the right to make changes without further notice. Silicon
Laboratories makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor
does Silicon Laboratories assume any liability arising out of the application or use of any product or circuit, and specifically disclaims
any and all liability, including without limitation consequential or incidental damages. Silicon Laboratories products are not designed,
intended, or authorized for use in applications intended to support or sustain life, or for any other application in which the failure of
the Silicon Laboratories product could create a situation where personal injury or death may occur. Should Buyer purchase or use
Silicon Laboratories products for any such unintended or unauthorized application, Buyer shall indemnify and hold Silicon
Laboratories harmless against all claims and damages.
Not Recommended
for New Designs
http://www.silabs.com
Silicon Laboratories Inc.
400 West Cesar Chavez
Austin, TX 78701
USA
ClockBuilder Pro
One-click access to Timing tools,
documentation, software, source
code libraries & more. Available for
Windows and iOS (CBGo only).
www.silabs.com/CBPro
Timing Portfolio
www.silabs.com/timing
SW/HW
www.silabs.com/CBPro
Quality
www.silabs.com/quality
Support and Community
community.silabs.com
Disclaimer
Silicon Laboratories intends to provide customers with the latest, accurate, and in-depth documentation of all peripherals and modules available for system and software implementers using
or intending to use the Silicon Laboratories products. Characterization data, available modules and peripherals, memory sizes and memory addresses refer to each specific device, and
"Typical" parameters provided can and do vary in different applications. Application examples described herein are for illustrative purposes only. Silicon Laboratories reserves the right to
make changes without further notice and limitation to product information, specifications, and descriptions herein, and does not give warranties as to the accuracy or completeness of the
included information. Silicon Laboratories shall have no liability for the consequences of use of the information supplied herein. This document does not imply or express copyright licenses
granted hereunder to design or fabricate any integrated circuits. The products are not designed or authorized to be used within any Life Support System without the specific written consent
of Silicon Laboratories. A "Life Support System" is any product or system intended to support or sustain life and/or health, which, if it fails, can be reasonably expected to result in significant
personal injury or death. Silicon Laboratories products are not designed or authorized for military applications. Silicon Laboratories products shall under no circumstances be used in
weapons of mass destruction including (but not limited to) nuclear, biological or chemical weapons, or missiles capable of delivering such weapons.
Trademark Information
Silicon Laboratories Inc.® , Silicon Laboratories®, Silicon Labs®, SiLabs® and the Silicon Labs logo®, Bluegiga®, Bluegiga Logo®, Clockbuilder®, CMEMS®, DSPLL®, EFM®, EFM32®,
EFR, Ember®, Energy Micro, Energy Micro logo and combinations thereof, "the world’s most energy friendly microcontrollers", Ember®, EZLink®, EZRadio®, EZRadioPRO®, Gecko®,
ISOmodem®, Precision32®, ProSLIC®, Simplicity Studio®, SiPHY®, Telegesis, the Telegesis Logo®, USBXpress® and others are trademarks or registered trademarks of Silicon Laborato-
ries Inc. ARM, CORTEX, Cortex-M3 and THUMB are trademarks or registered trademarks of ARM Holdings. Keil is a registered trademark of ARM Limited. All other products or brand
names mentioned herein are trademarks of their respective holders.
Not Recommended
for New Designs

SL23EP09NZSC-1H

Mfr. #:
Manufacturer:
Silicon Labs
Description:
Clock Buffer 0 to 220MHz, 9 Outputs Fanout Buffer (NZDB), 3.3V to 2.5V High Drive
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet