Description
Avago Technologies ASMT-FG10-NFJ00 is a SMT (Surface
Mount Technology) dome lamp uses an untinted, nondif-
fused lens to provide a high luminous intensity within a
narrow radiation pattern. The device is made by encap-
sulating LED chip on axial lead frame to form molded
epoxy lamp package with 6 bended leads for surfacing
mounting.
This lamp type LED utilizes Indium Gallium Nitrate
(InGaN) material technology. The InGaN material has
a very high luminous eciency, capable of producing
high light output over a wide range of drive currents.
The color available for this SMT Lamp package is 530nm
Green.
This narrow angle SMT lamp package is designed for ap-
plications that require long distance illumination and
narrow beam pattern such as auxiliary ash for auto-fo-
cus function in digital still camera etc. In order to facili-
tate pick and place operation, this SMT Lamp is shipped
in tape and reel, with 1000 units per reel.
This package is compatible with Pb-free 2x reow
soldering process.
Features
• Smooth, Consistent Narrow Radiation Pattern
• 11° View Angle
• 4.8 L x 4.8 X 5.33H mm Package Dimension
• Good Intensity Output
• Compatible with 2x Solder Reow
• Available in 16mm tape on 15inch (380mm) Diameter
reels
• Clear, Non-diused Epoxy
• RoHS compliance
Applications
• Camera
Eye Safety
This LED is tested Class 1 to IEC/EN 60825-1 (2001) under
operation at 20mA. This LED is not recommended to
drive beyond 20mA as some of this LED might fall in the
classication of Class 2M to IEC/EN 60825-1 (2001).
CAUTION: ASMT-FG10 LEDS ARE CLASS 1 ESD SENSITIVE. PLEASE OBSERVE APPROPRIATE PRECAUTIONS
DURING HANDLING AND PROCESSING. REFER TO AVAGO APPLICATION NOTE AN-1142 FOR ADDITIONAL DETAILS.
ASMT-FG10-NFJ00
Surface Mount AF Lamp
Data Sheet