INDUSTRIAL TEMPERATURE RANGE
IDT74ALVCH162374
3.3V CMOS 16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP
1
JULY 2009INDUSTRIAL TEMPERATURE RANGE
IDT and the IDT logo are registered trademarks of Integrated Device Technology, Inc.
© 2009 Integrated Device Technology, Inc. DSC-4565/5
FEATURES:
• 0.5 MICRON CMOS Technology
• Typical tSK(o) (Output Skew) < 250ps
• ESD > 2000V per MIL-STD-883, Method 3015; > 200V using
machine model (C = 200pF, R = 0)
•VCC = 3.3V ± 0.3V, Normal Range
•VCC = 2.7V to 3.6V, Extended Range
•VCC = 2.5V ± 0.2V
• CMOS power levels (0.4
μμ
μμ
μ W typ. static)
• Rail-to-Rail output swing for increased noise margin
• Available in TSSOP package
FUNCTIONAL BLOCK DIAGRAM
DESCRIPTION:
This 16-bit edge-triggered D-type flip-flop is built using advanced dual metal
CMOS technology. The ALVCH162374 is particularly suitable for implementing
buffer registers, I/O ports, bidirectional bus drivers, and working registers. It can
be used as two 8-bit flip-flops or one 16-bit flip-flop. On the positive transition of
the clock (CLK) input, the Q outputs of the flip-flop take on the logic levels set up
at the data (D) inputs. OE can be used to place the eight outputs in either a normal
logic state (high or low logic levels) or a high-impedance state. In the high-
impedance state, the outputs neither load nor drive the bus lines significantly.
The high-impedance state and the increased drive provide the capability to
drive bus lines without need for interface or pullup components. OE does not
affect internal operations of the flip-flop. Old data can be retained or new data
can be entered while the outputs are in the high-impedance state.
The ALVCH162374 has series resistors in the device output structure which
will significantly reduce line noise when used with light loads. This driver has
been designed to drive ±12mA at the designated threshold levels.
The ALVCH162374 has “bus-hold” which retains the inputs’ last state
whenever the input goes to a high impedance. This prevents floating inputs and
eliminates the need for pull-up/down resistor.
DRIVE FEATURES:
• Balanced Output Drivers: ±12mA
• Low switching noise
IDT74ALVCH162374
3.3V CMOS 16-BIT EDGE-
TRIGGERED D-TYPE FLIP-FLOP
WITH 3-STATE OUTPUTS
AND BUS-HOLD
1
OE
C1
1D
1
D
1
47
1
CLK
1
Q
1
TO 7 OTHER CHANNELS
2
OE
2
D
1
36
2
CLK
2
Q
1
TO 7 OTHER CHAN-
NELS
1
48
2
24
25
13
C1
1D
APPLICATIONS:
• 3.3V high speed systems
• 3.3V and lower voltage computing systems