Low Emission,
Isolated DC-to-DC Converters
Data Sheet
ADuM5020/ADuM5028
Rev. 0
Document Feedbac
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2018 Analog Devices, Inc. All rights reserved.
Technical Suppor t www.analog.com
FEATURES
isoPower integrated, isolated dc-to-dc converter
100 mA output current for ADuM5020
60 mA output current for ADuM5028
Meets CISPR22 Class B emissions limits at full load on a
2-layer PCB
16-lead SOIC_W package with 7.8 mm minimum creepage
8-lead SOIC_IC package with 8.3 mm minimum creepage
High temperature operation: 125°C maximum
Safety and regulatory approvals
UL recognition (pending)
3000 V rms for 1 minute per UL 1577
CSA Component Acceptance Notice 5A (pending)
VDE certificate of conformity (pending)
VDE V 0884-10
V
IORM
= 565 V peak
CQC certification per GB4943.1-2011
APPLICATIONS
RS-485/RS-422/CAN transceiver power
Power supply start-up bias and gate drives
Isolated sensor interfaces
Industrial PLCs
FUNCTIONAL BLOCK DIAGRAMS
GND
1
GND
1
PDIS
NIC
V
DDP
GND
1
NIC
GND
1
NIC
NIC
GND
ISO
GND
ISO
GND
ISO
V
SEL
V
ISO
1
2
3
4
5
6
7
8
9
10
11
12
14
13
15
OSC
RECT
REG
PCS
NIC = NO INTERNAL CONNECTION. LEAVE THIS PIN FLOATING.
ADuM5020
GND
ISO
16
16520-001
Figure 1. ADuM5020 Functional Block Diagram
GND
1
PDIS
V
DDP
GND
1
GND
ISO
GND
ISO
V
SEL
V
ISO
1
2
3
4
5
6
8
7
OSC
RECT
REG
PCS
ADuM5028
16520-102
Figure 2. ADuM5028 Functional Block Diagram
GENERAL DESCRIPTION
The ADuM5020 and ADuM5028
1
are isoPower®, integrated,
isolated dc-to-dc converters. Based on the Analog Devices, Inc.,
iCoupler® technology, these dc-to-dc converters provide
regulated, isolated power that is below CISPR22 Class B limits at
full load on a 2-layer printed circuit board (PCB) with ferrites.
Common voltage combinations and the associated current
output levels are shown in Table 1 through Table 4.
The ADuM5020 and ADuM5028 eliminate the need to design
and build isolated dc-to-dc converters in applications up to
500 mW. The iCoupler chip scale transformer technology is used
for the magnetic components of the dc-to-dc converter. The
result is a small form factor, isolated solution.
The ADuM5020 and ADuM5028 isolated dc-to-dc converters
provide two different package variants: the ADuM5020 in a
wide body, 16-lead SOIC_W package, and the ADuM5028 in
the space saving, 8-lead, wide body SOIC_IC. See the Pin
Configuration and Function Descriptions section and the
Ordering Guide for more information.
1
Protected by U.S. Patents 5,952,849; 6,873,065; 6,903,578; and 7,075,329. Other patents are pending.