DABiC-IV 20-Bit Serial-Input
Latched Source Driver
A6812
6
Allegro MicroSystems, Inc.
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
Limits @ V
DD
= 3.3 V Limits @ V
DD
= 5 V
Characteristic Symbol Test Conditions Mln. Typ. Max. Min. Typ. Max. Units
Output Leakage Current I
CEX
V
OUT
= 0 V — <-0.1 -15 — <-0.1 -15 μA
Output Voltage V
OUT(1)
I
OUT
= -25 mA 57.5 58.3 — 57.5 58.3 — V
V
OUT(0)
I
OUT
= 1 mA — 1.0 1.5 — 1.0 1.5 V
Output Pull-Down Current I
OUT(0)
V
OUT
= 5 V to V
BB
2.5 5.0 — 2.5 5.0 — mA
Input Voltage V
IN(1)
2.2 — — 3.3 — — V
V
IN(0)
— — 1.1 — — 1.7 V
Input Current I
IN(1)
V
IN
= V
DD
— <0.01 1.0 — <0.01 1.0 μA
I
IN(0)
V
IN
= 0 V — <-0.01 -1.0 — <-0.01 -1.0 μA
Input Clamp Voltage V
IK
I
IN
= -200 μA — -0.8 -1.5 — -0.8 -1.5 V
Serial Data Output Volt age V
OUT(1)
I
OUT
= -200 μA 2.8 3.05 — 4.5 4.75 — V
V
OUT(0)
I
OUT
= 200 μA — 0.15 0.3 — 0.15 0.3 V
Maximum Clock Frequency f
c
10* — — 10* — — MHz
Logic Supply Current I
DD(1)
All Outputs High — 0.25 0.75 — 0.3 1.0 mA
I
DD(0)
All Outputs Low — 0.25 0.75 — 0.3 1.0 mA
Load Supply Current I
BB(1)
All Outputs High, No Load — 3.0 6.0 — 3.0 6.0 mA
I
BB(0)
All Outputs Low — 0.2 20 — 0.2 20 μA
Blanking
-to-
Output Delay t
dis(BQ)
C
L
= 30 pF, 50% to 50% — 0.7 2.0 — 0.7 2.0 μs
t
en(BQ)
C
L
= 30 pF, 50% to 50% — 1.8 3.0 — 1.8 3.0 μs
Strobe
-to-
Output Delay t
p(STH-QL)
R
L
= 2.3 kΩ, C
L
30 pF — 0.7 2.0 — 0.7 2.0 μs
t
p(STH-QH)
R
L
= 2.3 kΩ, C
L
30 pF — 1.8 3.0 — 1.8 3.0 μs
Output Fall Time t
f
R
L
= 2.3 kΩ, C
L
30 pF 2.4 — 12 2.4 — 12 μs
Output Rise Time t
r
R
L
= 2.3 kΩ, C
L
30 pF 2.4 — 12 2.4 — 12 μs
Output Slew Rate dV/dt R
L
= 2.3 kΩ, C
L
30 pF 4.0 — 20 4.0 — 20 V/μs
Clock
-to-
Serial Data Out Delay t
p(CH-SQX)
I
OUT
= ±200 μA — 50 — — 50 — ns
Negative current is defi ned as coming out of (sourcing) the specifi ed device terminal.
Typical data is is for design information only and is at T
A
= +25°C.
* Operation at a clock frequency greater than the specifi ed minimum is possible but not warranteed.
ELECTRICAL CHARACTERISTICS at T
A
= +25°C (A6812S-) or over operating tem per a ture range (A6812E- or
A6812K-), V
BB
= 60 V; un less otherwise noted