PLD E 400 W ...
106445_en_03 10 / 10
PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany
phoenixcontact.com
8 Connection examples
Figure 6 Connection of the light using a door position
switch (A)
Figure 7 Connection of a light
Figure 8 Series connection of two lights
9 Function description
Once you have provided voltage to the light, it is ready for
operation and in mode 0 (delivery condition) or in the most
recently selected mode.
Button S1 on the light is used to control the light mode. The
current mode is indicated via the status LED.
Press the button to change mode. Each time button S1 is
pressed, the light changes to the next mode: 0 - A - I.
Figure 9 Button S1 and status LED
Mode Status LED Description
0 OFF No supply voltage
connected, or supply
voltage connected but lamp
switched off
A Yellow ON Light in standby mode, door
position switch is active
Lighting switches on when
cabinet door is opened,
switches back off when
cabinet door is closed
I Yellow flashing Light is on continuously
