SL2305ZI-1HT

Rev 0.1 9/13 Page 4 of 11
SL2305
Operating Conditions: Unless otherwise stated VDD=3.3V+/-10% and both C and I Grades
Soldering Temperature
260
°C
ESD Rating (Human Body Model)
JEDEC22-A114D
-4,000
4,000
V
ESD Rating (Charge Device Model)
JEDEC22-C101C
-1,500
1,500
V
ESD Rating (Machine Model)
JEDEC22-A115D
-250
250
V
Latch-up
125°C
-200
200
mA
Symbol
Description
Condition
Min
Max
Unit
VDD
3.3V Supply Voltage
3.3V+/-10%
3.0
3.6
V
TA
Operating
Temperature(Ambient)
Commercial
0
70
°C
Industrial
40
85
°C
CLOAD
Load Capacitance
10 to 140 MHz, -1H high drive
15
pF
10 to 100 MHz, -1H high drive
30
pF
10 to 100MHz, -1 standard drive
15
pF
10 to 66MHz, -1 standard drive
30
pF
CIN
Input Capacitance
CLKIN pin
7
pF
tpu
Power-up Time
Power-up time for all VDDs to reach
minimum VDD voltage (VDD=3.0V).
0.05
100
ms
CLBW
Closed-loop bandwidth
3.3V, (typical)
1.2
MHz
ZOUT
Output Impedance
3.3V (typical), -1H high drive
22
3.3V (typical), -1 standard drive
32
Not Recommended
for New Designs
Rev 0.1 9/13 Page 5 of 11
SL2305
DC Electrical Specifications: Unless otherwise stated VDD=3.3V+/-10% and both C and I Grades
Switching Specifications: Unless otherwise stated VDD=3.3V+/-10% and both C and I Grades
Symbol
Description
Condition
Min
Max
Unit
VDD
Supply Voltage
3.0
3.6
V
VIL
Input LOW Voltage
CLKIN (Pin-1)
0.8
V
VIH
Input HIGH Voltage
CLKIN (Pin-1)
2.0
VDD+0.3
V
IIL
Input LOW Current
CLKIN, 0 < VIN < 0.8V
25
µA
IIH
Input HIGH Current
CLKIN, VIN = VDD
50
µA
VOL
Output LOW Voltage
(All outputs)
IOL = 8 mA (standard drive)
0.4
V
IOL = 12 mA (high drive)
0.4
V
VOH
Output HIGH Voltage
(All outputs)
IOH = –8 mA (standard drive)
2.4
V
IOH = –12 mA (high drive)
2.4
V
IDDPD
Power Down Supply Current
CLKIN=0 to VDD
C-Grade, Power-down if CLKIN=0 to
VDD or input is floating
12
µA
I-Grade, Power-down if CLKIN=0 to
VDD or input is floating
25
µA
IDD1
Power Supply Current
All Outputs CL=0, 33MHz CLKIN
8
mA
IDD2
Power Supply Current
All Outputs CL=0, 66MHz CLKIN
14
mA
IDD3
Power Supply Current
All Outputs CL=0, 100MHz CLKIN
20
mA
IDD4
Power Supply Current
All Outputs CL=0, 133MHz CLKIN
26
mA
RPD
Pull-down Resistors
Pins-1/2/3/5/7/8, 250kΩ-typ
175
325
Symbol
Description
Condition
Min
Max
Unit
FMAX1
Maximum Frequency
[1]
(Input=Output )
All Active PLL Modes
High drive (-1H). All outputs CL=15pF
10
140
MHz
High drive (-1H), All outputs CL=30pF
10
100
MHz
Standard drive, (-1), All outputs CL=15pf
10
100
MHz
Standard drive, (-1), All outputs CL=30pf
10
66
MHz
INDC
Input Duty Cycle
Measured at 1.4V, Fout=66MHz,
CL=15pF
30
70
%
OUTDC1
Output Duty Cycle
[2]
Measured at 1.4V, Fout≥50MHz,
CL=15pF
40
60
%
OUTDC2
Output Duty Cycle
[2]
Measured at 1.4V, Fout≤50MHz,
CL=15pF
45
55
%
tr/f
Rise, Fall Time (3.3V)
[2]
(Measured at: 0.8 to 2.0V)
High drive (-1H), CL=10pF
1.5
ns
High drive (-1H), CL=30pF
1.8
ns
Standard drive (-1), CL=10pF
2.2
ns
Standard drive (-1), CL=30pF
2.5
ns
Not Recommended
for New Designs
Rev 0.1 9/13 Page 6 of 11
SL2305
Notes:
1. For the given maximum loading conditions. See CL in Operating Conditions Table.
2. Parameter is guaranteed by design and characterization. Not 100% tested in production.
t1
Output-to-Output Skew
[2]
(Measured at VDD/2)
All outputs CL=0 or equally loaded, -1 or
-1H drives
150
ps
t2
Product-to-Product Skew
[2]
(Measured at VDD/2)
All outputs CL=0 or equally loaded, -1 or
-1H drives
400
ps
t3
Delay Time, CLKIN Rising
Edge to CLKOUT Rising
Edge
[2]
Measured at VDD/2
–220
220
ps
tPLOCK
PLL Lock Time
[2]
Time from 90% of VDD to valid clocks on
all the output clocks
1.0
ms
CCJ
Cycle-to-cycle Jitter
[2]
Fin=Fout=66 MHz, <CL=15pF, -1H drive
140
ps
Fin=Fout=66 MHz, <CL=15pF, -1 drive
150
ps
Fin=Fout=66 MHz, <CL=30pF, -1H drive
160
ps
Fin=Fout=66 MHz, <CL=30pF, -1 drive
170
ps
Not Recommended
for New Designs

SL2305ZI-1HT

Mfr. #:
Manufacturer:
Silicon Labs
Description:
Clock Buffer 10 to 140MHz, 5 Outputs Zero Delay Buffer (ZDB), 3.3V High Drive
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union