Data Sheet ADuM230D/ADuM230E/ADuM231D/ADuM231E
Rev. A | Page 13 of 21
Truth Tables
Table 19. ADuM230D/ADuM231D Truth Table (Positive Logic)
V
Ix
Input
1, 2
V
DISABLEx
Input
1, 2
V
DDI
State
2
V
DDO
State
2
Default Low (D0),
V
Ox
Output
1, 2, 3
Default High (D1),
V
Ox
Output
1, 2, 3
Test Conditions/
Comments
L L or NC Powered Powered L L Normal operation
H L or NC Powered Powered H H Normal operation
X H Powered Powered L H
Inputs disabled,
fail-safe output
X
4
X
4
Unpowered Powered L H Fail-safe output
X
4
X
4
Powered Unpowered Indeterminate Indeterminate
1
L means low, H means high, X means don’t care, and NC means not connected.
2
V
Ix
and V
Ox
refer to the input and output signals of a given channel (A, B, or C). V
DISABLEx
refers to the input disable signal on the same side as the V
Ix
inputs. V
DDI
and V
DDO
refer to the supply voltages on the input and output sides of the given channel, respectively.
3
D0 refers to the ADuM230D0/ADuM231D0 models, and D1 refers to the ADuM230D1/ADuM231D1 models. See the Ordering Guide section.
4
Input pins (V
Ix
, DISABLE
x
) on the same side as an unpowered supply must be in a low state to avoid powering the device through its ESD protection circuitry.
Table 20. ADuM230E/ADuM231E Truth Table (Positive Logic)
V
Ix
Input
1, 2
V
Ex
Input
1, 2
V
DDI
State
2
V
DDO
State
2
Default Low (E0),
V
Ox
Output
1, 2, 3
Default High (E1),
V
Ox
Output
1, 2, 3
Test Conditions/
Comments
L H or NC Powered Powered L L Normal operation
H H or NC Powered Powered H H Normal operation
X L Powered Powered Z Z Outputs disabled
L H or NC Unpowered Powered L H Fail-safe output
X
4
L
4
Unpowered Powered Z Z Outputs disabled
X
4
X
4
Powered Unpowered Indeterminate Indeterminate
1
L means low, H means high, X means don’t care, and NC means not connected, and Z means high impedance.
2
V
Ix
and V
Ox
refer to the input and output signals of a given channel (A, B, or C). V
Ex
refers to the output enable signal on the same side as the V
Ox
inputs. V
DDI
and V
DDO
refer to the supply voltages on the input and output sides of the given channel, respectively.
3
E0 refers to the ADuM230E0/ADuM231E0 models, and E1 refers to the ADuM230E1/ADuM231E1 models. See the Ordering Guide section.
4
Input pins (V
Ix
, V
Ex
) on the same side as an unpowered supply must be in a low state to avoid powering the device through its ESD protection circuitry.