OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

SKY13586-678LF

P1-P3P4-P6P7-P8
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203452E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 12, 2016 1
DATA SHEET
SKY13586-678LF: 2.4 to 2.5 GHz SP3T Switch
Applications
802.11 a/b/g/n/ac WLAN networks
Bluetooth
®
systems
Smartphones
Connectivity modules
Features
Positive low voltage control: 0/1.8 to 3.6 V
Insertion loss: 0.75 dB @ 2.5 GHz (typical)
High isolation: 35 dB @ 2.5 GHz (typical)
1.8 V and 3.3 V logic compatibility
Wide 3 to 5 V supply voltage range
Integrated DC blocking capacitors
Miniature, ultra-thin MLP (8-pin, 1.1 x 1.1 x 0.33 mm) package
(MSL1, 260 C per JEDEC J-STD-020)
Skyworks Green
TM
products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of Green
TM
, document number
SQ04–0074.
RFC
V1
RF1
GND
RF2
V2
VDD
RF3
GND
1
2
3
4
5
6
7
8
203452-002
Figure 2. SKY13586-678LF Pinout
(Top View)
VDD V1 V2
Logic and Supply
RFC
RF1
RF2
RF3
203452-001
Figure 1. SKY13586-678LF Block Diagram
Description
The SKY13586-678LF is a single-pole, triple-throw (SP3T)
antenna switch for 2.4 GHz WiFi applications. Switching between
the antenna (RFC signal) and the RF1, RF2, and RF3 ports is
accomplished with two control voltages (V1 and V2).
The low loss, high isolation, high linearity, small size, and low
cost make this switch ideal for all WLAN and Bluetooth systems
operating in the 2.4 to 2.5 GHz band.
The SKY13586-678LF has integrated DC blocking capacitors, so
external DC blocking capacitors are not required.
The SKY13586-678LF is manufactured in a compact,
1.1 x 1.1 x 0.33 mm, 8-pin Micro Leadframe package (MLP). A
functional block diagram is shown in Figure 1. The pin
configuration and package are shown in Figure 2. Signal pin
assignments and functional pin descriptions are provided in
Table 1.
DATA SHEET • SKY13586-678LF: 2.4 TO 2.5 GHz SP3T SWITCH
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2 October 12, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203452E
Table 1. SKY13586-678LF Signal Descriptions
Pin Name Description Pin Name Description
1 RFC Antenna 5 RF2 RF port 2
2 V1 Switch logic control (see Table 4) 6 VDD DC power supply
3 RF1 RF port 1 7 RF3 RF port 3
4 V2 Switch logic control (see Table 4) 8 GND Ground
1
Exposed GND pad must be grounded.
Electrical and Mechanical Specifications
The absolute maximum ratings of the SKY13586-678LF are
provided in Table 2. Electrical specifications are provided in
Table 3.
The state of the SKY13586-678LF is determined by the logic
provided in Table 4.
Table 2. SKY13586-678LF Absolute Maximum Ratings
1
Parameter Symbol Minimum Typical Maximum Units
Input power PIN +32 dBm
Supply voltage VDD 6.0 V
Control voltage VCTL 3.7 V
Storage temperature TSTG –65 +150 C
Operating temperature TOP –40 +90 C
1
Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters
set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device.
This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce
potentials of several kilovolts on the human body or equipment, which can discharge without detection.
Industry-standard ESD handling precautions should be used at all times.
DATA SHEET • SKY13586-678LF: 2.4 TO 2.5 GHz SP3T SWITCH
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203452E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 12, 2016 3
Table 3. SKY13586-678LF Electrical Specifications
1
(VDD = 3.3 V, VCTL = 0 V and +1.8 V, TOP = +25 °C, PIN = 0 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted)
Parameter Symbol Test Condition Min Typical Max Units
Insertion loss IL 2.4 to 2.5 GHz 0.75 0.95 dB
Isolation RFC to RF1/RF2 or RF3 ISO 2.4 to 2.5 GHz 31 35 dB
Isolation RF1 to RF2 ISO 2.4 to 2.5 GHz 35 40 dB
Return loss RL 2.4 to 2.5 GHz 12 dB
P0.1db compression point P0.1dB 2.4 to 2.5 GHz +29 dBm
Harmonics PIN = +24 dBm, fo = 2.4 GHz:
2fo
3fo
–50
–32
dBm
dBm
Input IP3 IP3 PIN = +20 dBm/tone, fo = 2.4 GHz 46 dBm
Error vector magnitude EVM 802.11g, 2.4 GHz, PIN = +24 dBm
802.11g, 2.4 GHz, P
IN = +25.5 dBm
–43
–41
–38
–36
dB
dB
Startup time ts 50% VDD to 90% of RF 2 5 μs
Switching speed tsw 50% VCTL to 90% RF 300 400 ηs
Supply voltage VDD Normal test conditions 3 3.3 5 V
Control voltage:
High
Low
V
CTL_H
VCTL_L
Normal test conditions
1.6
1.8
0
3.6
0.4
V
V
Supply current IDD Normal test conditions 5 10 μA
1
Performance is guaranteed only under the conditions listed in this table.
Table 4. SKY13586-678LF Truth Table
1
VDD V1 V2 RFC - RF1 RFC - RF2 RFC - RF3
1 1 1 OFF ON OFF
1 1 0 ON OFF OFF
1 0 1 OFF ON OFF
1 0 0 OFF OFF ON
1
“1” indicates V
DD = 3 to 5 V, VCTL = 1.6 to 3.6 V.
“0” indicates V
CTL = 0 to 0.4 V.
Any state other than described in this table places the switch into an undefined state. An undefined state will not damage the device.
P1-P3P4-P6P7-P8

SKY13586-678LF

Mfr. #:
Buy SKY13586-678LF
Manufacturer:
Skyworks Solutions, Inc.
Description:
RF Switch ICs SP3T with 1.8V logic
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet