DATA SHEET • SKY13586-678LF: 2.4 TO 2.5 GHz SP3T SWITCH
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
4 October 12, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203452E
Evaluation Board Description
The SKY13586-678LF Evaluation Board is used to test the
performance of the SKY13586-678LF SP3T Switch. An Evaluation
Board schematic diagram is provided in Figure 3. An assembly
drawing for the Evaluation Board is shown in Figure 4.
Package Dimensions
The PCB layout footprint for the SKY13586-678LF is provided in
Figure 5. Typical part markings are shown in Figure 6. Package
dimensions are shown in Figure 7, and tape and reel dimensions
are provided in Figure 8.
Package and Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
The SKY13586-678LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 C. It can be used for lead or lead-free soldering.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
2
V1
3
RF1
8
GND
4
V2
1
RFC
6
VDD
5
RF2
7
RF3
C1
1 nF
RF Output
Port 2
RF Output
Port 3
RF Output
Port 1
DC
Control 1
RF
Input
DC
Supply
GND
DC
Control 2
203452-003
Figure 3. SKY13586-678LF Evaluation Board Schematic