EZ80F910100KIT Datasheet EZ80F910100KIT, EZ80F910200KITG | P1-P3

An Company

www.zilog.com

Introduction

This quick qtart guide provides instructions and configuration information for

Zilog’s eZ80F91 Mini Ethernet module, eZ80Acclaim!

Modular Development System

(MDS) adapter board, and associated components. The eZ80F910100KIT and

eZ80F910200KITG modular development kits are covered in this quick start guide.

Kit Contents

For a complete list of material shipped with the eZ80F91 Modular Development Kit

(eZ80F910200KITG), refer to eZ80F910200KITG eZ80F91 Series Development Kit

Packing List (PAK0015).

System Requirements

Table 1 lists the system requirements for running ZDS II.

Table 1. ZDS II System Requirements

Recommended Configuration Minimum Configuration

• PC running MS Windows XP

Professional

• PC running MS Win2000–SP4/WinXP Professional

• Pentium III/500 MHz or higher

processor

• Pentium II/233 MHz processor

• 128 MB RAM • 96 MB RAM

• 110 MB hard disk space • 25 MB hard disk space (documentation not

installed)

• Super VGA video adapter • Super VGA video adapter

• CD-ROM drive • CD-ROM drive

• One or more RS-232

communication port

• One or more RS-232 communication port

•

USB high-speed port • USB high-speed port

eZ80F91 Modular

Development Kit

Quick Start Guide

QS004611-0810

eZ80F91 Modular Development Kit

QS004611-0810 Page 2 of 10

Installation Overview

The eZ80F91 Mini Ethernet module is preinstalled on the eZ80Acclaim!

MDS adapter

board. To set up the development kit, install the ZDS II software. Connect the kit to PC,

using the USB Smart Cable or Serial Smart Cable, as appropriate. Connect power to the

adapter board. Figure 1 displays the eZ80F91 Modular Development Kit.

Previous versions of the development kit used the Serial Smart Cable. New

kits as of June 2006 uses the USB Smart Cable.

Follow the steps below to install the cable available with your kit:

1. Install the ZDS II software as described in Installing the ZDS II Software and Kit

Documentation on page 3.

Figure 1. The eZ80F91 Modular Development Kit

2. Connect your PC to the eZ80Acclaim! MDS adapter board as follows:

(a) If you are using the Serial Smart Cable, follow the instructions in Connecting the

Serial Smart Cable to Your Computer on page 3.

(b) If you are using the USB Smart Cable (not included with this kit), follow the

instructions in Installing the USB Smart Cable on page 3.

3. Connect the 5 V DC power supply to the adapter board.

4. Connect the development kit to your PC and run the supplied sample project as

described in Running Sample Projects on page 6.

For complete details on developing an application for the development kit, refer to Zilog

Developer Studio II–eZ80Acclaim!

User Manual (UM0144), and eZ80F91 Modular

Development Kit User Manual (UM0170).

Note:

eZ80F91 Modular Development Kit

QS004611-0810 Page 3 of 10

Installing the ZDS II Software and Kit Documentation

Follow the steps below to install ZDS II and eZ80F91 development kit documentation:

1. Insert the ZDS II CD into the CD-ROM drive. DemoShield launches automatically. If

DemoShield does not launch automatically, open the Windows Explorer, browse to

your CD-ROM drive, and double-click

launch.exe to launch the installer.

2. Click the Install Products button from the main installer menu. From the product

installer list you can choose to install only ZDS II, or ZDS II and associated documen-

tation. You can also copy the documentation directly from your CD-ROM drive to

your hard disk using Windows Explorer.

Zilog recommends registering your new ZDS II software. By registering

ZDS II, you have access to free technical support, software components, and

other tools that only registered Zilog customers have. To register online, go to

http://support.zilog.com/CustomerPortal/.

Connecting the Serial Smart Cable to Your Computer

Connect the Serial Smart Cable 9-pin DB9 serial connector to a COM port on your com-

puter.

Connecting the Serial Smart Cable to the MDS Adapter Board

Attach one end of the six-conductor ribbon cable to the Smart Cable 6-pin DBG connec-

tor. See Figure 2 on page 5. Attach the free end of the ribbon cable to the connector on the

eZ80Acclaim!

MDS adapter board. The connectors are keyed to ensure proper align-

ment.

Installing the USB Smart Cable

You can install the USB Smart Cable for the following operating systems:

Windows Vista-32

Follow the steps below to install the USB Smart Cable for Windows Vista-32:

1. Connect the USB Smart Cable to the host PC. The Found New Hardware dialog box

is displayed.

2. Select Locate and install driver software (recommended). The Driver Software

Installation window is displayed, and then the Found New Hardware-USB Smart

Cable dialog box is displayed.

Note:

P1-P3 P4-P6 P7-P9 P10-P10

EZ80F910100KIT

Mfr. #:

Buy EZ80F910100KIT

Manufacturer:

ZiLOG

Description:

Development Boards & Kits - Other Processors EZ80F91 Acclaim Kit

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

EZ80F910100KIT

EZ80F910100KIT

Products related to this Datasheet