2322 640 3/4/6....
Vishay BCcomponents
NTC Thermistors, Accuracy Line
www.vishay.com For technical questions contact: nlr
.europe@vishay.com Document Number: 29049
88 Revision: 10-Oct-03
REEL SPECIFICATIONS
JW113
22.5
30
+1
−0
77 85.6 92
356
max.
18
3
42 ±1
56 max
Dimensions of the reel.
CODE NUMBERS AND RELEVANT PACKAGING QUANTITIES
Note
1. The maximum number of empty places per reel shall not exceed 0.1% of the total number of
components per reel. With no consecutive positions empty.
CHARACTERISTICS OF TAPED PRODUCTS
Minimum pull-out force of the component: 5 N.
Minimum peel-off force of adhesive tape: 6N.
Minimum tearing force tape: 15 N.
Minimum pull-off force of tape-reel: 5 N.
STORAGE CONDITIONS
Storage temperature range: −25 to +40 °C.
Maximum relative humidity: 80%.
PARAMETER
BULK
TAPE AND REEL
(1)
1e pitch
TAPE AND REEL
(1)
2e pitch
2322 640 6.... 2322 640 4.... 2322 640 3....
Quantity 500 1500 per reel, 2 reels per
box
1500 per reel, 2 reels per
box
TESTS AND REQUIREMENTS
Essentially all tests are carried out in accordance with “IEC publication 60068-2; Environmental testing”, except where indicated.
Notes
1. For R
25
≥ 100 kΩ the drift requirement is ∆R/R < 5%.
2. For R
25
from 2.2 kΩ to 10 kΩ, requirement is ±2% max.
STABILITY TESTS
CECC 32 100
CLAUSE
IEC
60068-2
TEST METHOD
TEST PROCEDURE REQUIREMENTS
D3; 4.20.1 endurance 25 °C; 1000 hours ∆R/R < 1%
1 endurance −40 °C; 1000 hours ∆R/R < 1%
539 endurance 500 mW; 55 °C; 1000 hours ∆R/R < 3% (note 1)
2 dry heat, 125 °C; 1000 hours ∆R/R < 3%
D1; 4.19 3 damp heat 56 days at 40 °C; 90 to 95% RH ∆R/R < 3%
C2; 4.14 14 rapid change of temperature −40 °C to +125 °C; 50 cycles ∆R/R < 2%
Other applicable tests
21 robustness of leads: ∆R/R ≤ 1%
tensile strength loading force 10 N
bending loading force 5 N
58 soldering: ∆R/R ≤ 1% (note 2)
solderability 240 °C max.; duration 4 s max.
resistance to heat 265 °C max.; duration 5 s max.
27 impact free fall; 1 m ∆R/R ≤ 1%
29 shock 490 m/s; half sinewave ∆R/R ≤ 1%
45 resistance to solvent ambient temp for 5 min; no traces of lacquer on
6 vibration 1.5 mm peak to peak: 10 to 58 Hz no visible damage
2inflammability 1980, needle flame test non-flammable
