EAPIST3224A2 Datasheet EAPIST3224A2 | P7-P9

DATASHEET

EAPIST3224A2

Issue No:

XXXXXXXXXX Rev.0.1

www.everlightamericas.com

4. Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350к for 3 seconds within

once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering

of each terminal. Be careful because the damage of the product is often started at the time of the hand

solder.

5. Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a

double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the

characteristics of the LEDs will or will not be damaged by repairing.

DATASHEET

EAPIST3224A2

Issue No:

XXXXXXXXXX Rev.0.1

www.everlightamericas.com

Package Dimensions

Note: The tolerances unless mentioned is ̈́0.1mm ,Unit = mm

2. Carrier Tape Dimensions:(Quantity: 1000pcs/reel)

Note: The tolerances unless mentioned is ̈́0.1mm ,Unit = mm

DATASHEET

EAPIST3224A2

Issue No:

XXXXXXXXXX Rev.0.1

www.everlightamericas.com

Packing Procedure

Aluminum moistue-proof bag

LabelDesiccant

Label

Label Form Specification

CPN: Customer’s Production Number

P/N : Production Number

QTY: Packing Quantity

CAT: Ranks

HUE: Peak Wavelength

REF: Reference

LOT No: Lot Number

MADE IN TAIWAN: Production Place

Notes

1. Above specification may be changed without notice. Everlight Americas will reserve authority on material

change for above specification.

2. When using this product, please observe the absolute maximum ratings and the instructions for using

outlined in these specification sheets. Everlight Americas assumes no responsibility for any damage

resulting from use of the product which does not comply with the absolute maximum ratings and the

instructions included in these specification sheets.

3. These specification sheets include materials protected under copyright of Everlight Americas corporation.

Please don’t reproduce or cause anyone to reproduce them without Everlight Americas’s consent.

P1-P3 P4-P6 P7-P9

EAPIST3224A2

Mfr. #:

Buy EAPIST3224A2

Manufacturer:

Everlight

Description:

Infrared Emitters Emitter SMD

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

EAPIST3224A2