OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

11014

P1-P3P4-P6P7-P7
MeTemperatureSensor‐Waterproof(DS18B20)
SKU: 11014 Weight: 60.00 Gram
Description:
This is the temperature sensor based on chip DS18B20 consisting of a waterproof
probe and long wire shape, which is perfect for immersive temperature detectionor
detectingg something far away.The DS18B20 provides 9 to 12-bit (configurable)
temperature readings over a 1-Wire interface, so that only one wire (and ground) needs
to be connected from a central microprocessor.
The original one includes three wires inside，we adjusted it into a 3-pinconnector so
that you can use it simply with Makeblock Me Adapter. (there is no soldering required to
connect to our Me BaseBoard just like below picture).
please note that while the sensor is good up to 125°C, the cable which is jacketed in
PVC will be damaged easily, so we suggest keeping it under 100°C.
Features:
Waterproof
Uses 1-Wire interface- requires only one digital pin for communication
Stainless steel tube 6mm diameter by 35mm long
Arduino library for easy programming
Dimensions: Probe is 6mm in diameter and roughly 50mm long. Overall length
(including wire) is 0.5 meter
Specification
Power supply: 3.0V to 5.5V
Wide temperature range: -55°C to +125°C
High accuracy: ±0.5°C( -10°C to +85°C)
Overview
The Me Temperature Sensor module is a metal tube thermometer with DS18B20 detector.
Featuring strong anti-interference ability and high accuracy, it is covered with waterproof
rubber hose outside and able to measure temperature in the range -55~+125. It can be
connected to the RJ25 Adapter module which is then connected to Makeblock Orion for
temperature measurement.
Technicalspecifications
● Operating voltage: 5V DC
● Sensor type: DS18B20
● Temperature range: -55~125
● Control mode: Single bus port
● Dimension: 500 x 6 x 6mm
Functionalcharacteristics
● 9~12 bits A/D conversion accuracy
● High precision: ±0.5 (-10~+85)
● Probe diameter 6 mm, length 50 mm approximately, total length 1 m (including line)
● Short time delay in temperature conversion, maximum 750ms
● Support multi-point networking
● Perfect waterproof property
● Support mBlock GUI programming, and applicable to users of all ages
Pindefinition
The port of Me Temperature Sensor has three pins, and their functions are as follows:
Wiringmode
● Connecting with RJ25
If you want to connect to a thermometer through the RJ25 port, simply connect it to the RJ25
Adapter module, and then connect the module to Makeblock Orion as follows:
P1-P3P4-P6P7-P7

11014

Mfr. #:
Buy 11014
Manufacturer:
Heyco
Description:
LED Mounting Hardware HLEDS2M-180 NATURAL PVC/NYL LED Spacer
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet