● mBlock programming
The Me Temperature Sensor-Waterproof module supports the mBlock programming
environment and its instructions are introduced as follows:
This is an example on how to use mBlock to control
the Me Temperature S
ensor module.
It will make the panda speaking out the value of temperature captured by the Me Temperature
Sensor, and the running result is as follows:
Principleanalysis
With the main component DS18B20, the Me Temperature Sensor module features
miniaturization, low power consumption, high performance, strong anti-interference ability, and
matching with microprocessor easily. Adopting unique single bus port mode, DS18B20 is in
connection with a microprocessor by only a bus to implement two-way communication
between the microprocessor and DS18B20. The module supports the function of multi-
point networking, so several DS18B20 can be connected in parallel on the only three-line to
implement multi-point temperature measurement, and the measurement results are
transmitted in 9~12 bits serial digital mode. When communicated with a single chip computer,
you can set the resolution by configuring the register.
