SL2S5302_SL2S5402 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet
COMPANY PUBLIC
Rev. 3.2 — 27 August 2012
192132 27 of 35
NXP Semiconductors
SL2S5302; SL2S5402
ICODE SLIX-S
9. Limiting values
[1] Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only
and functional operation of the device at these or any conditions other than those described in the operating conditions and electrical
characteristics sections of this specification is not implied.
[2] This product includes circuitry specifically designed for the protection of its internal devices from the damaging effects of excessive static
charge. Nonetheless, it is suggested that conventional precautions be taken to avoid applying greater than the rated maxima.
[3] The voltage between LA and LB is limited by the on-chip voltage limitation circuitry (corresponding to parameter I
I
).
[4] For ESD measurement, the IC was mounted in a CDIP8 package.
10. Characteristics
10.1 Wafer memory characteristics
10.2 Interface characteristics
[1] Bandwidth limitation ( 7 kHz) according to ISM band regulations.
[2] Including losses in the resonant capacitor and rectifier.
[3] Measured with an HP4285A LCR meter at 13.56 MHz and 2 V RMS.
Table 65. Limiting values (Wafer)
[1][2]
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
T
stg
storage temperature 55 +125 C
P
tot
total power dissipation - 125 mW
T
j
junction temperature 40 +85 C
I
i(max)
maximum input current LA to LB; peak
[3]
- 60 mA
I
I
input current LA to LB; RMS - 30 mA
V
ESD
electrostatic discharge voltage Human body model
[4]
- 2kV
Table 66. Wafer EEPROM characteristics
Symbol Parameter Conditions Min Typ Max Unit
t
ret
retention time T
amb
55 C50- - year
N
endu(W)
write endurance 100000 - - cycle
Table 67. Interface characteristics
Typical ratings are not guaranteed. The values listed are at room temperature.
Symbol Parameter Conditions Min Typ Max Unit
f
i
input frequency
[1]
13.553 13.56 13.567 MHz
V
i(RMS)min
minimum RMS input voltage operating
read/write
1.5 - 1.7 V
P
i(min)
minimum input power operating
[2]
-40-W
C
i
input capacitance between LA
and LB
[3]
SL5302FUD 22.3 23.5 24.7 pF
SL5402FUD 92 97 102 pF