Package Information
www.vishay.com
Vishay Siliconix
Revision: 11-Aug-14
1
Document Number: 71612
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SC-89 6-Leads (SOT-563F)
Notes
1. Dimensions in millimeters.
2. Dimension D does not include mold flash, protrusions or gate
burrs. Mold flush, protrusions or gate burrs shall not exceed
0.15 mm per dimension E1 does not include interlead flash
or protrusion, interlead flash or protrusion shall not exceed
0.15 mm per side.
3. Dimensions D and E1 are determined at the outmost extremes
of the plastic body exclusive of mold flash, the bar burrs, gate
burrs and interlead flash, but including any mismatch between
the top and the bottom of the plastic body.
4. Datums A, B and D to be determined 0.10 mm from the lead tip.
5. Terminal numbers are shown for reference only.
6. These dimensions apply to the flat section of the lead between
0.08 mm and 0.15 mm from the lead tip.
6
4
32
4
32
5
4
Caaa
C
M
ddd
A–B D
2x
e
B
6x b
Caaa
2x
D
E/2
E
Cbbb
2x
123
654
E1
E1/2
A
D
e1
L1
L
A
B
C
A1
A1
SECTION B-B
DETAIL “A”
SEE DETAIL “A”
DIM.
MILLIMETERS
MIN. NOM. MAX.
A 0.56 0.58 0.60
A1 0 0.02 0.10
b 0.15 0.22 0.30
c 0.10 0.14 0.18
D 1.50 1.60 1.70
E 1.50 1.60 1.70
E1 1.15 1.20 1.25
e 0.45 0.50 0.55
e1 0.95 1.00 1.05
L 0.25 0.35 0.50
L1 0.10 0.20 0.30
C14-0439-Rev. C, 11-Aug-14
DWG: 5880
