Step-by-Step Installation Instructions
Install CodeWarrior
™
for
ColdFire Architectures
Version 7.1 or later
Install CodeWarrior 7.1.1 or
later patch for MCF5225x
Installing CodeWarrior provides the driver
files for the built in debug support.
Install Freescale MQX
software package 3.0.0
STEP
1
STEP
2
Connect the USB cable
between the PC and the
USB debugger connector
Establish communication to
the integrated debugger in
order to power the board
This step is only required for the
open source bdm firmware version
that accompanies CodeWarrior update
7.1.1 or earlier.
Open CodeWarrior
Select File > Open
c:\Program Files\Freescale MQX 3.0\
demo\web_hvac\codewarrior\web_hvac_
m52259demo.mcp
Click Make
Click Run
When CodeWarrior makes the connection,
the integrated debugger circuit provides
power to the microprocessor, thus
enabling the application to run.
NOTE: The board comes pre-programmed with the
web_hvac demo application, therefore programming
the flash is not initially required.
M52259DEMOKIT—Quick Start Guide
In this Quick Start Guide, you will
learn how to set up the board and
run the default web server demo.
Additional labs are available on the
following software:
• FreescaleMQX
• ColdFire
®
Lite TCP/IP stack
by InterNiche
• USB-LITEstackbyCMX
• USBBootloader
STEP
3
